construction of new 33 kv line laxmipur maharajganj- 1 part a (materials provided by contractor) 2 33kv ‘xlpe’ c/j kit 3x300mm² outdoor 3 33kv ‘xlpe’ c/j kit 3x300mm² straight through 4 danger board with clamp 5 barbed wire 6 bolts, nuts, & washers 7 x-armclamp with nut bolt for st pole 11 mtr with nut bolt by 50x8 mm msflat iron make 8 x-arm clamp with nut bolt for pcc pole 9 mtr with nut bolt by 50x8 mm msflat iron make 9 complete stay (gi stay rod 20x1800mm, stay wire 7/8 swg 10 kg, stay clamp, bolt, nut& washer with concerte grouting) 10 ms earthing rod 20x2500 mm 11 p.g. clamp for dog 12 ‘e’ bracket for 33 kv 13 m.s. angle iron 65x65x6mm bracing with clamps 14 33 kv. top channel (125x65mmx3200 mm (10.7 kg/m) with clamps 15 33 kv guarding angle 16 gi wire 5 mm 17 33 kv guarding angle clamp with nut bolt for st pole 11mtr. with nut and bolt by 50x8 mm ms flat iron make. 18 33 kv guarding angle clamp with nut bolt for pcc pole 9 mtr. with nut and bolt by 50x8 mm ms flat iron make. 19 f-bracket with nut bolt for st pole 11 mtr with nut bolt by 50x8 mm msflat iron make 20 f-bracket with nut bolt for pcc pole 9 mtr with nut bolt by 50x8 mm msflat iron make 21 alluminium paint 22 red oxide paint 23 part- bwork shifting,loading and carriageof following materials on private truck at store centre maharajganj & un-loading of the same with proper stacking at work site . 24 p.c.c.pole9 m long 25 s.t. pole – 11 mtr. long 26 33 kv ‘xlpe’ cable 3x300mm² 27 acsr ‘dog’ conductor 28 33kv ‘v’ type cross arm 100x50x6mm, ms channel ( 7.9 kg/m) 29 33 kv polymer pin insulator 30 33 kv polymer disc insulator 70 kn b&s type 31 disc fitting 70 knb&s type for dog 32 laying of 33 kv 3x300 mm² ‘xlpe’ cable of by digging pit below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.fixing brick slab on top after filling sand around both the cable including cost of bricks/ hdd method by drillingmachine as per site requirement. 33 laying of 33kv ‘xlpe’ cable in air after providing 6” dia. m.s pipe 3 m long complete work. 34 cable jointing charges of 33 kv xlpe cable outdoor. 35 cable jointing charges of 33 kv xlpe cable straight through. 36 gi pipeearthing complete forcable jointing kit with materials 37 erection of single pole structure on 9 mtr pcc pole including all works of evocation of pit, pole erection & fitting of all accessories for single circuit ( v type cross arm 100 x 50 x 6 mm, m.s. channel (7.9 kg./m) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp,barbed wire earthing, etc. complete as per resspo). 38 extension of 9 mtr pcc pole for proper clearence for existing lines by 33 kv top channel with clamp with complete work as per proper specification. 39 erection of double pole structure on 9 mtr pcc pole for one side u/g and one side o/h line.including all works of evocation of pit, pole erection & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,barbed wire earthing, etc. complete as per resspo) . 40 erection of double pole structure on 9 mtr pcc pole for both side u/g line.including all works of evocation of pit, pole erection & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,barbed wire earthing, etc. complete as per resspo) . 41 erection of double pole structure on 9 mtr pcc poleincluding all works of evocation of pit, pole erection & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,barbed wire earthing, etc. complete as per resspo) . 42 erection of four pole structure on 9 mtr pcc poleincluding all works of evocation of pit, pole erection & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp,barbed wire earthing, etc. complete as per resspo) . 43 erection of single pole structure on 11mtr st. (sp-55) pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above & fitting of all accessories for single circuit ( v type cross arm 100 x 50 x 6 mm, m.s. channel (7.9 kg./m) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per resspo. 44 erection of double pole structure on 11 mtr st pole including all works of evocation of pit, pole erection & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per resspo) . 45 erection of four pole structure on 11 mtr st pole including all works of evocation of pit, pole erection & fitting of all accessories (m.s. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per resspo) . 46 laying, spreading, lifting and final sagging of 3 phases of acsr dog conductorin accordance with profile and sag chart including binding, jumpering and fixing of p.g. clamp as per requirement in 03 nos. conductor in parallel. 47 grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. 48 painting of s.t pole 11 mtr. long with alluminium paint and red oxide paint etc. 49 chopping of branches of trees of eucalyptus, neem, keekar and other kind of trees along the route of the line and disposal of the same at suitable place. 50 guarding between two poles like single poles, double poles, four poles, etc. to guard lt, 11 kv line telephone and river crossing, road crossing etc. with g.i. wire no. 6 swg and g.i. wire no. 8 swg, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.