renewal of damaged painted service road of rampur dy.from km. 15.147 to km. 16.600 - earth work in closing and repairing cuts and pot holes in inner side of service road in all type of soil including all lead and lift complete with dressing and mannual compaction. 2 wbm grading : iii providing laying,spreading and compaction stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 kn in stages to proper grade and camber, applying and brooming stone screening to fill up the intrestices of coarse aggregate, watering and compacting to the requireddensity grading ii as per mord specification clause 405. 3 wbm grading : ii providing laying,spreading and compaction stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 kn in stages to proper grade and camber, applying and brooming stone screening to fill up the intrestices of coarse aggregate, watering and compacting to the requireddensity grading ii as per mord specification clause 405. 4 providing and applying prime coat with bitumen emulsion on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg per square meteras per mord specification. 5 providing and applying tack coat with bitumen (vg-10)using emulsion distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular base surface cleaned with mechanical broom. as per mord specification. 6 providing, laying and rolling of open -graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using viscocity grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mixplant of appropriate capacity. transportation to the site, laying with paver finisher to the required grade level and alignment and rolling with a smooth wheeled roller 8-10 kn capacity, finished to required level and grades by paver finisher as per technical specification class 510. 7 supplying & fixing of singboard at site . 8 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levelgrade and cross fall using type c seal coat (as per mord specified clause 510)