procurement of steel materials for structure renovation of stacker cum reclaimer-3 under chp-mm dept., ktps through capex 25-26- 1 channel,ismc 125 ( a) make- sail/tata/jindal/rinl b) size- standard length=6, thickness as per standard. c) material must conforms to is:2062:2011 d) quantity tolerance +/- 5%. ) 2 m.s. equal angle, 75 x 75 x 8 ( a) make- sail/tata/jindal/rinl b) size- standard length=6, thickness as per standard. c) material must conforms to is:2062:2011 d) quantity tolerance +/- 5%. ) 3 ms plate 20 mm # ( a) make sail/tata/jindal/rinl. b) material must conform tois:6911-1992. c) size-standard length- 6 meters, widthminimum 1 meter. d) quantity tolerance +/- 5%. ) 4 ms plate 16 mm # (a) make sail/tata/jindal/rinl. b) material must conform tois:6911-1992. c) size-standard length- 6 meters, widthminimum 1 meter. d) quantity tolerance +/- 5%. ) 5 ms plate 10 mm thick,is:2062 grade a # (a) make sail/tata/jindal/rinl. b) material must conform tois:6911-1992. c) size-standard length- 6 meters, widthminimum 1 meter. d) quantity tolerance +/- 5%. ) 6 m.s. equal angle, 90 x 90 x 10 # 7 erw pipe,40nb ms black,3.25mm thk ( make- sail/tata/jindal/rinl size- standard length 6 m, as per is 1239, 1990,tolerance in length:+/- 5% ) 8 gi gratings ( a ) i) outer dimension of each gratings 1000 mm x 1000 mm. ii) mesh size 80 mm x 40 mm. iii) gi flat dimension 30 mm (width)x 6mm(thickness). iv) gi square bar dimension 8 mm x 8 mm. b) parallel and cross members are to be fixed by making slot, then welded thoroughly. c) quantity tolerance +/- 2%. )