supply of steel materials for chp at ktps. , sailhard plate 20 mm thick # ( 1. size–standard length- 6 meters, width- minimum 1 meter, thickness-20 mm. make- sail/tata/jindal/rinl ) , sailhard wear resist. ms plate,16 mm thk # sailhard or equivalent ms hardened plates. surface hardness or core hardness shall be at least 200 bhn. ( 2. size–standard length- 6 meters, width- minimum 1 meter, thickness-16 mm. make- sail/tata/jindal/rinl ) , plate,sailhard,12mm thick ( 3. size–standard length- 6 meters, width- minimum 1 meter, thickness-12 mm. make- sail/tata/jindal/rinl ) , h.r.steel, 3.15mm, is:1079 grade.0 (sk) # ( 4. 1. make sail/tata/jindal/rinl. 2. material must conform to is:6911-1992. 3. standard width 1200mm-1250mm & length will be of 5000mm. ) , chequered plate, ms, 8mm thick # is:2062/84(re) ( 1. make sail/tata/jindal/rinl. 2. material must conform to is:6911-1992. 3. size–standard length- 6 meters, width- minimum 1 meter, thickness-8 mm. ) , m.s. equal angle, 90 x 90 x 8, is : ( a) make- sail/tata/jindal/rinl b) size –standard length=6 metres. thickness as per standard. c)material must conforms to is:2062:2011 ) , m.s. equal angle, 75 x 75 x 8 # ( a) make- sail/tata/jindal/rinl b) size –standard length=6 metres. thickness as per standard. c)material must conforms to is:2062:2011 ) , m.s. equal angle, 65 x 65 x 6 ( a) make- sail/tata/jindal/rinl b) size –standard length=6 metres. thickness as per standard. c)material must conforms to is:2062:2011 ) , m.s. equal angle,50x50x6, is:2062 gr.a # ( a) make- sail/tata/jindal/rinl b) size –standard length=6 metres. thickness as per standard. c)material must conforms to is:2062:2011 ) , channel,ismc 125 ( a) make- sail/tata/jindal/rinl b) size –standard length=6 metres. thickness as per standard. c)material must conforms to is:2062:2011 )