tender for sports infrastructure development works atchathannur la constituency-thekkumbhagam government ghss ground atparavur,kollam-supply and installation of outdoor gym equipment and sports equipment - retender -- 1 out door gym equipment and sports equipment(18 % gst) 2 od241584/2024_2025 : chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od b class gi pipe. foundation plate - m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od b class g.i. pipe. handle - made up of ø 48mm od b class g.i. pipe. link - made up of ø 48 mm od b class g.i. pipe. seat &back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing caps - pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap - dome shape made by pp /nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing 3 od241585/2024_2025 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of ø 88 mm od “b” class gi pipe dually bending design. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. paddle vertical support - ø 42 mm od “b” class gi pipe. handle - ø 33 mm od “b” class gi pipe dually bending design. leg movement frame – 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap – dome shape made by pp / nylon / hdpe material. closing cap’s– pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od b class g.i. pipe. and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - ø 60mm od seamless pipe. pin –made of ø 25mm m.s. bright bar. circlips – a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. 4 od241586/2024_2025 : rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) =1472 x 915 x 1040 mm. upper and bottom pipes - ø 88 mm od b class gi pipe. foundation plate –m.s. round plate of ø 250 mm & 8 mm thick. handle - ø 33 mm od “b” class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages – ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - ø 60 mm od “b” class g.i. pipe. end closing cap – dome shape made by pp / nylon / hdpe material. closing caps – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin – ø 25 mm m.s. bright 5 bar pin. circlips– a 24 circlips are used for assembly. bearing bushes - ø 60 mm od seamless pipe /bar. bearing- use is 6005 permanent lubricated reputed brands. grips – high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing 5 od241587/2024_2025 : triple twister - supply and installation of triple twister (standing position - 2 and seating position - 1) having the following specifications: dimensions: (l x w x h) 1500 x 1500 x 1420 mm. main frame – ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. seat plate support – ø 60 mm od “b” class g.i pipe. seating ring - ø 33 mm od “b” class g.i pipe made by rolling. seating ring support - ø 33 mm od “b” class g.i pipe. remaining frame – is made by 100 x 50 x 2.5 mm rectangular pipe. standing plate- ø 300 mm od x 10 mm thick m.s. plate. seating plate- ø 300 mm od x 10 mm thick m.s. plate. seating seat position and other two standing position plates are fixed 120 degrees each from other. handle – ø 33 mm “b” class g.i. pipe made by rolling. top closing cap –dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - used is 6005 permanent lubricated reputed brand.bearing bushes - ø 60 mm od seamless pipe. pin – made up of ø 25mm m.s. bright bar. circlips– a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. 6 od241588/2024_2025 : air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x380 x 1244 mm. main frame- ø 88 mm od b class gi pipe dually bending design. foundation plate –m.s. round plate of ø 250 mm &8 mm thick. paddle– ø 42 mm od round gi pipe. handle – ø 33 mm od “b” class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap – dome shape made by pp / nylon / hdpe material. closing cap’s - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin’s – ø 25mm m.s. bright bar pin. circlips– a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. 7 od241595/2024_2025 : supply of air pump - brand: raj cycle single cylinder or similar make, weight approx. 1.8kg with pressure gauge 8 od241598/2024_2025 : supply of marker cone - cones 9 inch (9) made of plastic, available in assorted colours. 9 sports equipment (12% gst) 10 od11018/2025_2026 : supply of volleyball - brand: cosco or similar make , model: super volley genuine leather pasted or similar make 11 od11019/2025_2026 : supply of football - brand: nivia or similar make , model: shining star or similar make