tender for maint of roads outpocket area under age br i of ge dinjan; 1 scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, depth exceeding 50 mm but not exceeding 100 mm complete all as specified and as directed. 2 m & l for 7.5 cm thick (compacted thickness) wbm, with coarse aggregates of lime stone, sand stone, flint or quartzite of grading 2 (63 to 45 mm size) or of grading 3 (53 to 22.4 mm size), spread, rolled and compacted to required gradient and camber with three wheel-power roller of 80 to 100 kn capacity or an equivalent vibratory roller complete all as specified and as directed. 3 preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. 4 repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming and applying tack coat at the rate of 5 kg per 10 sqm, putting in bituminous macadam well rammed and sealed with bitumen 9.8 kg per 10 sqm blinded with 0.09 cum stone chippings, 6.3 mm size and rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed. 5 preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer (paving bitumen vg 30) at 5 kg/ 10 sqm complete all as specified and as directed. 6 m & l for bituminous concrete 40 mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen vg-30 grade) @ 5.5% by weight of total mix & hydraulic lime/cement(opc-43 grade) filler, rolled and compacted to required camber and gradient complete all as specified and as directed. note :- (i) semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) the exact bitumen content required shall be determined following the marshall mix design procedure contained in the asphalt institute manual ms-2 (sixth edition) as referred in case 3.5.3 of irc 111: 2009. the adjustment in rate on minus side variation in quantity of bitumen if any shall be priced at the rate of ₹60 per kg. no claim whatsoever shall be made for adjustment in plus side. 7 m & l for bituminous macadam not exceeding 75 mm thickness (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen vg-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed. note :- (i) bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) the exact bitumen content required shall be determined as per irc 27: 2009. the adjustment in rate on minus side variation in quantity of bitumen if any shall be priced at the rate of ₹60 per kg. no claim whatsoever shall be made for adjustment in plus side. 8 supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and as directed. 9 providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t & p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed. 10 m & l for continuous brick edging using old size bricks; with width equal to the width of the brick; laid dry on end vertically complete all as specified and as directed.