bids are invited for custom bid for services - 1 support services construction of boundary wall (approx. 350 feet length) there is existing foundation and boundary wall of heigh! varying from 1 feet to 2 feet a 6 inch coping beam to be installed prior increasing the height (with 4 in number 10mm tor steel rods and 8 mm tor steel ring, to be filled with cement and concrete.) overall height is to be made 6 ft from ground level. wall to be constructed with bela stone (sample kept at school premises). width of wall to be minimum 9 inch. broken glass pieces to be installed on top surface of wall. vertical side support wall (min 5 inch thickness) upto full height of 6 feet to be provided on inner side at every 15 feet. cement plaster followed by two coats of distemper (primer and finish coat) construction of boundary wall (approx. 370 feet ength) fresh wall to be constructed starting from foundation (up to hard ground), the overall height of wall is to be made 6 feet from ground level. 6 inch pcc (with 4 in number 10 mm tor steel rods and 8 mm tor steel ring, to be filled with cement and concrete.) wall to be constructed with beta stone (sample kept at school premises). width of wall to be minimum 9 inch. broken glass pieces to be installed on top surface of wall. vertical side support wall (min 5 inch thickness i upto ful height of 6 feet to be provided on inner side at every 15 feet. cement plaster followed by two coats of distemper (prime and finish coat) to be done on both sides for full height of wall.