annual plan-ekgp proj.no:83/25-26 construction of mini mcf at various ward-mini mcf-general civil work-- 1 mini mcf 2 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 4 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 5 16.71:providing and fixing g.i. chain link fabric fencing of required width in mesh size 25x25 mm made of g.i wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer - in- charge. 6 od37597/2025-2026:providing and fixing aluzinc profile sheets(size,shape and pitch of corrugation as approved by engineer-in charge)0.40mm(+0.05%),thickness. sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or asdesiredbyengineer-in-charge. the sheet shall be fixed using self drilling/selftapping screws of size(5.5x55mm)with epdm seal ,complete upto any pitch in horizontal/vertical orcurvedsurfaces ,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (mod 12.50 of dsr ) 7 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 8 od37690/2025-2026:manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminimum sheet as approved by engineer-in-charge, letters, borders etc. including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including appropriate priming coat. the rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charges. (rectangular area of the sheet only shall be measured for payment ). 9 13.71:lettering with black japan pint of approved brand and manufacture 10 12.51.1:providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per is:mm(+0.05%) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:ridges plain (500-600 mm)