annual plan-ezhome gp pro.no.60/25-26-construction of mini mcf-general civil work-- 1 portable mini mcf 2 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 5 13.62.1:painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade:two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . 6 od158326/2025-2026:supplying and fixing welded mesh 15x15mm 10 gauge for side wall including cost and conveyance of materials and all labour charges etc. complete as per as per the direction of dept: officers 7 od155485/2025-2026:providing and fixing alu-zinc profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.40mm (+0.05%) thickness. sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with epdm seal, complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafter sand trusses and including cutting to size and shape wherever required. (mod 12.50 of dsr ) 8 12.51.1:providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :ridges plain (500-600 mm) 9 od155484/2025-2026:manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminum sheet as approved by engineer-in-charge, letters, borders etc. including the cost of painting with two or more coats of epoxy paint in grey color on the back side of aluminum sheet including appropriate priming coat. the rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charges. (rectangular area of the sheet only shall be measured for payment ).modified 16.60.1 10 13.71:lettering with black japan pint of approved brand and manufacture