tender for construction of compound wall raising work at rr park in chettiyarpatti town panchayat.; 1 centering for soffits of rcc slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm x60cm x and b.g 10 stiffened with m.s angles of size 25mm x 25mm x 3mm laid over silver oak (c.w) joists of size 10cm x 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm c/c) complying with standard specification and directed - 10 m 2 (p & d)data 38 2 suppling and fabricating and placing in position ms(or) r.t.s. bar for reinforcement to all rcc works as per the design given including cost ofsteel and binding wire also in all floors. 3 brick work in cm 1:5 (one cement & five crushed stone sand (m- sand)) using ii class ground moulded bricks of size 9 x 4 3/8x 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100cft 4 providing and laying in position standardised concrete mix m-20 grade in accordance with is 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all rcc items of works with minimum cement contenet of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (plasticiser / super plasticiser) in recommended proportions as per is 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of crushed stone sand (m- sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - 5 plastering with cement mortar 1:5 (one part of cement and five part of plastering sand (p- sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 6 painting two coats for interior surface with approved interior plastic emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.