bids are invited for chipping scrapping painting the whole bodychassis etc., by conventional method of spray painting, including cost of all duties, gst etc., complete-approximate area- 602 sqm - chipping, scrapping & painting the whole body & chassis etc., by conventional method of spray painting, after leveling the body perfectly so as to minimise the use of metal paste and putty, using two coats of high quality of automotive paints of approved colour over prime ps gray etc., rubbing and polishing, including cost of all materials, paints, thinner, hire charges of painting guns & compressor, cost of all labour charges, cost of tools & plants, including cost of all duties, gst etc., complete (approximate area- 602 sqm) , cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness m.s sheet, m.s angles, m.s.channel, ms grills, approximately 1.85 mt. - cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness m.s sheet, m.s angles, m.s.channel, ms grills, all radiator line pipes with suitable clamp and steel pipe are to be replaced with m.s. pipeetc as per the original shape and sizes with alignment by gas cutting, gas weilding, arc welding etc by using standard welding rods and the works includes replacingof newly like air cleaner, silencer and other body components in position, providing door hinges, window & door locks etc, as per direction of the eic including cost of all labour charges, welding materials, gas welding materials, minor tools and plants and hire charges of welding and gas plants, cabin locks, all materials required for fabrication works, transportation and handling charges, cost of consumable, hinges, tower bolts etc.,complete. including cost of 4.00 mm ms steel, ms angles, m.s.channel, m.s. pipes etc., complete. including transportation charges. the work has to be cariied out as per the direction of eic.approximately 1.85 mt. , aligning the wiring and electrical c