providing and fixing of sanitary items and painting and white washing at various staff qtrs. at twell no. kv 1 in sector 20 panchkula including mtc. and defect liability period of one year free of cost - 1 5.43.1:- dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. for thickness of tiles 10 mm to 25 mm [through rate] 2 10.58:- providing and fixing 1st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 3 10.63.2:- providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. size of tile 600x600 mm [through rate] 4 11.58:- providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [through rate] 5 11.69.1:- applying priming coats with primer of approved brand and manufacture, having low voc (volatile organic compound ) content. 1. with ready mixed pink or grey primer on wood work (hard and soft wood) having voc content less than 50 grams/ litre [through rate] 6 12.19.1.1.1:- providing and fixing wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 1.1.1. 35 mm thick shutters with isi marked m.s. pressed butt hinges bright finished of required size second class teak wood [through rate] 7 12.36.1:- providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 1. 35 mm thick including isi marked stainless steel butt hinges with necessary screws [through rate] 8 22.1.1:- providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 1. white vitreous chinaware wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps[through rate] 9 22.8.2:- providing and fixing 15 mm c.p. brass laboratory cock swan neck of best quality (to the approval of engineer-in-charge). 2. two way [through rate] 10 22.22.1:- providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. white vitreous chinaware orissa pattern w.c. pan of size 580x440 mm with integral type foot rests [through rate] 11 22.39.1:- providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. 1. 10 litre capacity - white [through rate] 12 22.105.1:- providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 1. 15 mm nominal bore [through rate] 13 22.108.1:- providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 1. 15mm nominal bore [through rate] 14 30.22:- removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. [through rate] 15 30.28.1:- painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. one or more coats on old work [through rate]