construction of mumty and shed in saini chaupal, anand nager (ward-11) mc sonepat. --1 [10.47]providing and laying baroda green marble stone 17mm and above thick in risers of step, skirting , dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. the rates are for all heights / storey. the sample shall be got approved from engineer in charge. [through rate] 2 [11.4.2]10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand) [through rate] 3 [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [through rate] 4 [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) [through rate] 5 [11.60]providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. [through rate] 6 [11.65.1]distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer`s specification. 1. two or more coats on new work [through rate] 7 [11.67.1]applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. water thinnable cement primer [through rate] 8 [11.77]applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. [through rate] 9 [11.78]painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [through rate] 10 [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) [through rate] 11 [12.20.1]providing and fixing wire gauge laminated veneer lumber shutters conforming to is : 14616, using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per is :1568, for doors, windows and clerestory windows, including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws, as per directions of engineer-in-charge: (note:- butt hinges and necessary screws shall be paid separately) 1. 35 mm thick shutters [through rate] 12 [12.20.2]providing and fixing wire gauge laminated veneer lumber shutters conforming to is : 14616, using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per is :1568, for doors, windows and clerestory windows, including isi marked m.s. pressed butt hinges bright finished of required