supply of shell kitshell kit,shell kit item for lslrd without dg set 1)underframe complete to drg. no. 7 4111001, alt d- 1 no. the manufacturing facility as per icf/md/specn.147, issue status-01, rev.02 with amendment no.1 2)roof assembly to drg. no. 74116001, alt e - 1 no. to be suppl ied with welding pin as per drg no 74110053, alt nil- 1 no (with latest sub drawing 49516008, alt a) 3)end roof assembly to drg. no. 58116066, alt g - 2 nos. 4)location of 2 mm side wall ass embly to drg. no. 74114001, alt e col.i - 1 no location of back pieces to drg. nos. 741140 71, alt c and 74114056, alt nil shall be assembled on side walls. items marked as loose in drg. nos. 74114071, alt c and 74114056, alt nil to be supplied as loose, along with sid ewall assemblies. the firm shall fulfill the requirement as per icf/md/specn. 200, issue st atus-01, rev-04 with amendment no.1 5)end wall complete npp end to drg. no. 74115003, a lt b -1 no. 6)end wall complete pp end to drg. no. 74115001, alt f -1 no. the firm shall fu lfil the requirement as per icf/md/spec-315,issue status-01, rev.00. 7) body shell items an d partition frames to drg.no. 74110001, alt f (except items 1 to 6) - 1 no. firm has to supply roof and sidewall without applying etch primer. special condition : packing for roof and side wa ll as per schedule a-(to be delivered to shell) complete roof and side wall to be supplied with welding pins welded to roof assembly as per drawing. schedule b-(to be delivered to fur) cap to drawing no 49516008002 alt a and serrated spring washer to drawing no 495 16008003 alt a of required quantity as per drawing are to be packed in suitable polythen e bags of 100 microns thickness with printed label with complete details kept inside hthe polythene bags. (complte details: 1. item description 2.qty in the packing 3. date of packing 4 . po no. 5. type of coach 6. vendors name and address.) polythene bags to be sealed properly to prevent moisture and water entry. a) i) packing as per i