supply of shell kitshell kit,shell kit items for lws (752) coaches a) one coach set of roof, 2 mm sidewall and en d wall 1)roof assembly to drg no 75216001, alt nil - 1 no. 2)end roof assembly to drg no 58116066, alt g - 2 nos. 3)sidewall to drg no 75214001, alt nil - 1 no. welding pin to be assembled as per drg no 58110037 (with latest sub drawing 49516008 alt a) 4)end wall to drg no 74115001, alt f - 2 nos. the firm shall fulfil the requirement as per icf//md/specn.200, issue status-01, rev.04 with amend ment no. 01. the firm shall fulfil the requirement as per icf/md/spec-315, issue status-01, rev.00. b) partition frames and body shell items. 1) 75210012, alt nil - 1 no. 2) 75210002, alt nil - 1 no. 3) 58210036, alt a - 2 nos. 4) 75210003, alt nil - 1 no. 5) 67010011, alt a - 2 nos. 6) aaa 10488, alt c - 6 nos. 7) 58110017, alt b - 2 nos. 8) 58110015, alt a - 6 nos. 9) 58110016, alt a - 3 nos. 10) aab10338, alt nil - 16 nos. c) under frame complete to drg.no.67011001, alt l - 1 no . the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendmen t no.01 firm has to supply roof and sidewall without applying etch primer and the firm has to apply etch primer on roof and sidewall in icf after shell assembly. special condition : packing for roof a nd side wall as per schedule a- (to be delivered to shell) complete roof and sidewall to be supplied with welding pins welded to roof assembly as per drawing. schedule b- (to be d elivered to fur) cap to drg no 49516008002 alt a and serrated spring washer to drg no 495 16008003 alt a of required quantity as per drawing are to be packed in suitable polythene bags of 10 0 microns thickness with printed label with complete details kept inside the polythene bags. (complet e details: 1. item description, 2. qty in the packing, 3. date of packing, 4. po no., 5. type of coach, 6. vendors name & address) polythene bags to be sealed properly to prevent moisture an d water entry. a0 i) packing for roof and si