supply of bod inncubator ( digital bod incubator ( digital ) -340 litre , bod incubator ( digital ) - 340 l , technical specifications temperature: standard temperature range of our bod incubators is 5°c to 60°c. in incubation process, temperature accuracy and uniformity both are important; therefore, our bod incubators are equipped with digital pid controller supported by pt100 sensor for temperature settings that displays both sv ( set value ) and pv ( process value ) . temperature accuracy is ± 0.5°c and uniformity remains ± 1°c. illumination: for illumination, we use fluorescent or led light, which is door operated use can also individual switch it on or off permanently. as an option, we also provide 3 tube lights on door with digital cyclic timer in to control the illumination 24x7 weekly. safety: there are some safety features in our bod incubators such as over temperature and over current protection and temperature low and high limit buzzer alert etc. cooling: for cooling temperature under bod incubator, we use cfc free refrigeration system of reputed brand in the market such as emerson or godrej. heating: heating is done by isi mark u shaped tubular air heaters. air circulation: air circulation is mandatory to spread uniform temperature inside the chamber; for this we use axial fans or motorized blower system. construction: our bod incubators are made keeping durability in mind. construction is durable and double walled; exterior is made of thick mild steel and powder coated; while, interior is made of stainless steel. the gap between these two walls is filled with puf insulation. outer door is solid and there is also an inner door made of glass to view samples. outer door has mechanical door lock and key. trays: each bod incubator is provided with 2 to 5 removable trays. these trays are removable and height adjustable and made of steel wire mesh cable. we also provide perforated stainless steel trays as option. options: we offer some options to our customers with little added cost. these options are 21 cfr software, pc interface and plc based hmi controller with usb interface and validation port at either side of the machine. we also make gmp bod incubators with complete stainless steel construction. should have 2-3 years warranty