purchase of cooling cabinet , vertical autoclave , laboratory incubator and bod incubators -1 cooling cabinet: 12 cu.ft , 340 litre ninside chamber made of stainless steel 304 grade and outer chamber mild steel duly painted or s.s. 304. temperature range 0 to 25oc & controlled by digital temperature indicator cum controller. provided with adjustable shelves n• inner chamber : made of s.s.304 grade n• outer chamber : made of mild steel duly painted or s.s. 304 n• compressor : kirloskar / danfoss / isi marked ( 05 yr warranty ) n• insulation : puff insulation n• controller : p.i.d. based digital temperature indicator cum controller n• temp. range : 0°c to 25°c n• temp. accuracy : ± 1°c n• refrigerant : cfc free n• power supply : 220 v, 50 hz, single phase ac supply ninside made of s.s. 304 & outside made of mild steel duly painted n 2 vertical autoclave : 750 x 550 ( 30”x 22” ) high pressure vertical autoclave ( triple walled ) sterilization – semi automatic n• for dry sterilization. n• digital display of temperature and timer. n• inner chamber, outer wall, boiler & steam jacket are made of s. s. 304 grade. n• middle chamber : stainless steel 304 n• lid : stainless steel 304 n• radial locking system : made of steel bars n• accessories included: n1 ) automatic pressure control switch ( apc ) n2 ) automatic low water cut off arrangement ( alw ) n3 ) vacuum breaker n4 ) pressure gauge n5 ) water level indicator n6 ) safety valve n7 ) steam release valve n8 ) paddle lifting device n9 ) s. s. basket nspecial features n1 ) single panel feather touch led microprocessor controller n2 ) simultaneous display of temperature & time. n3 ) timer starts automatically as soon as the set temperature is attained & stop the ncycle automatically as soon the time is over. n4 ) the steam is to be released manually. n 3 laboratory incubator : n605 x 910 x 605 ( 24”x36”x18” ) 336 litres ntriple wall construction. fully automatic high precision nfitted with air circulating fan which circulate the hot air in between inner chamber & insulation through one path between inner chamber & middle chamber which minimizes the loss of heat & temperature variation at any point inside the chamber & make it perfect system. nconstruction ninside chamber : s. s. 304 grade nmiddle chamber : made of g. i. sheet. noutside chamber : made of mild steel / g. i. sheet duly painted. ntemperature n controller : door mounted digital ndoor : single door with glass window. ntimer : digital, automatic, inbuilt nshelves : strong stainless steel wire shelves. nventilation : provided on both side. ngasket : door gasket made of silicon / synthetic rubber. ntemperature range : ambient to 70°c naccuracy : ± 0.5°c or better ( at 37°c ) nreadability : 0.5°c npower supply : 220 v, single phase, 50 hz, ac supply nspecial features n• controller mounted on the door ( no separate panel ) n• feather touch led +lcd both display with digital timer n• once the set temperature is attained, timer starts working automatically n• raise alarm if the temperature overshoot / undershoot n• continuous display on l. c. d. of set temp., attained temp., set time, heating on / off. n• display of door open ( if door is not closed ) & heater gets switched off automatically. n• indicator of auto-mode, sensor failure ( in case of sensor failure ) n• 70% higher use through trouble free adjustment of trays anywhere at a gap 4cms n 4 b.o.d. cooling incubator with suitable voltage stabilizer n ( 1020 x 620 x 520 for 340 ltrs ) ndigitally controlled microprocessor based automatic n ( low temperature incubator ) double walled. n• inner chamber : made of s.s.304 grade n• outer chamber : made of mild steel duly painted or s.s. 304 n• inside door : fitted with unbreakable transparent acrylic n• outer door : thick, insulated, powder coated n• compressor : fitted with standard make kirloskar / shriram n• circulating fan : 2 nos. fitted inside the chamber n• shelf : 3 nos. made of ss wire. the trays can be adjusted anywhere at a distance of 4cms. n• working temp. : 5°c to 50°c or 10°c to 50°c when lights are on. n• temp. accuracy : ± 1°c ( or 0.5°c under ideal conditions ) n• temp. readability: 0.1°c n• power supply : 220 v, 50 hz, single phase ac supply nsalient feature n1. feather touch controller, plate mounted on the door with digital display l.e.d + l.c.d. both n2. port for computer interface ( optional ) n3. continues display of set temperature, attained temperature, time, day, date, etc n4. as soon as the set temperature is attained, timer starts automatically & raise the alarm after the set time is over ( fully automatic ) . n5. led indicator for door open , power failure, sensor failure n6. battery operated controller with indication of power failure ( optional ) n7. 70% higher uses through trouble free adjustment of trays anywhere at a gap 4cms n