construction of karinthar anganavadi material supply for construction of karinthar anganavadi , anganvadi material , stone for masonry work , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm nominal size , coarse sand (zone iii) , portland cement , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , twisted steel/deformed bars , solid blocks of size 40x20x20cm , mild steel sheets for tanks , iron pintels including weldded pin , mild steel sheets with bolts and nuts to rest on pintels , mild steel hooks , 200 mm aluminium aldrop , 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished) , powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , fine sand (zone iv) , vitrified floor tile 60x60 cm , stone aggregate(single size): 40 mm nominal size , stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm , c.i. bracket for wash basin and sinks , pvc pipe 50 mm outer dia. 10 kgf/cm2 , pvc pipe 63 mm outer dia . 6kgf/cm2 , pvc pipe 25 mm outer dia. 10kgf cm2 , pvc 45 degree elbow 63 mm dia , pvc bend 63 mm dia , deharadun white lime , plastic emulsion paint , epoxy paint , g.i. pipes 40 mm dia , welding by electric plant , stone aggregate(single size): 06 mm nominal size , interlocking c.c. paver block (60 mm thick, m-30)