tender for thermoplastic paint and other work of road signage from ch 0.000 to 31.225 of baksa teji bazar lohinda road, other works of thermoplastic paint and road signage from chainage 0.000 to 31.225 of baksa-tejibazar-lohinda road.sl. no. item description1 road marking with hot applied thermoplastic compound with reflectrorising glass beads on bituminous surface. providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250 gms per sqm area, thickness of 2.50mm in exclusive of surface applied glass beads as per irc:35-2015 the finished surface to belevel, uniform and free from streaks and holes. the surface should be concealed so that there should not be any exposed surface without powder coating. alternatively, these metal guide poles can be concealed with thermoplastic body the posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. mild steel guide poles shall conform to type xi sheeting specifications as per irc:67 and astm d4956 which would ensure to obtain clear visibility of the road alignment during night time. the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory / institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture abroad. altematively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer/client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012 & proof of the same report shall be uploaded which quoting tender. the rate shall include all materials, labour, t&p transportation, installation and incidentals all complete as per direction of the engineer-in-charge. (including all material, t&p, labor cess etc. but excluding g.s.t.) 3 retro-reflectorised traffic sign as per irc-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informative sign as per irc 67- 2012 made of high intensity grade sheeting type-iv vide clause 801.3, fixed over aluminum sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with m 15 grade cement concrete 45 cm x 45 cm x 60 cm. 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture abroad. alternatively, a certificate conforming to astm specification (d 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer/client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012. legends, letters numerals and borders etc should be as per morth specification no-801.3.7 proof of the same in form of government report shall be uploaded while quoting tender90 cm high octagon (including all material, t&p, labor cess etc. but excluding g.s.t.)