tender for year 2024-25 road safety short term thermoplastic paint work on sambhal baypass road odr - providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beeds @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beeds as per irc 35 the finished surface to be hard uniform and free from streaks and heats (ch no 27) andincluding all material, labour, labour cess, t&p royalty, all tasex ect. complete as per direction by i-in-c but excluding g.s.t. 2 supplying and fixing of single mould twin shank reflective road studs of ‘category a’ raised pavement markers made out of poly carbonate/abs moulded body conform to astm d4280 & morth section 800. the raised pavement marker shall also meet all the testing conditions of astm d4280 and fixed to the road surface using the adhesive recommended by the manufacturer. two cylindrical polymer shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the rpm body. the length of the road stud shall be 100 mm, width shall be 90 mm and the height of the road stud shall not exceed 20 mm. the base of the marker shall be flat within 1.3 mm as per morth section 800. the road stud shall support a load of 13635 kg tested in accordance with astm d4280.the road stud shall withstand flexural strength of 909 kgf force in accordance with astm d4280. road stud lenses shall be moulded of polycarbonate or methyl methecrylate conforming to astm d788. the area of each retro reflectory surface shall not be less than 13.0 sq.cm.the slope or retro – reflectory surface shall be 35 +/- 5 degree to base.the raised pavement marker shall be make in india and shall be tested for abrassion resistance from government lab and report shall be uploaded along with tender. if somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. the product should accompany two year replacement warranty for satisfactory field performance from the manufacturer. (with shank)as per sor ch-26 item no.-5 andincluding all material, labour, labour cess, t&p royalty, all tasex ect. complete as per direction by i-in-c but excluding g.s.t.