resurfacing work with 5 years maintenance of pmgsy road from rabupura to nangla hukum singh, yeida wc-04 - preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacitydressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.dar-2018/16.1/ based on uppwd/ sor/ 2020 2 dry brick on edge flooring in required pattern with bricks of class designation 75 on a bed of 12 mm local earth including filling joints with jamuna sand (with f.p.s. bricks) complete. dar/11.2/ based on uppwd sor 2020 3 wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam precification including premixing the material with water omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per technical specification clause 406 of morth/ based on uppwd sor 2020 4 providing and applying tack coatwith bitumen vg-10 usingbitumen pressure distributor on the prepared bituminous surface cleaned with mechanical broomon granular base such as wbm and wmm surface with 2.50kg of bitumen for 10sqm ar yeida morth sor 2020based on uppwd / sor-2020 5 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonne per hour using crushed agg. of specified grading, primixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per mort&h specification clause 509 complete in all respects.. based on uppwd sor- 2020 6 providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. (dar-2018/16.62/ based on uppwd/sor-2020) 7 for five year maintenance