tender for resurfacing work of 45.00mtr wide road along gh-03a to 3d ,gh-04 in sector-22d yea. wc-02 - providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub-base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications per technical specification clause 406 of morth (uppwd/sor-2020 2 cement concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work dar 281 p-17 3 m-150 brick work in 1:4 cement and coarse sand of 2.20 f.m. mortar in foundation and plinth including supply of all material labour and t&p etc required for proper completion of work uppwd sor 2020 350a 4 12 mm cement plaster of mix: 1:6 ( 1 cement : 6 coarse sand) sor 13.4.2 5 providing and laying at or near ground level factory made kerb stone of m-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-in- charge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb shone shall be approved by engineer-in-charge). uppwd sor-2020/16.69 6 providing and applying tack coat with bitumen vg-10 bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom uppwd sor 2020 7 providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.25-4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects. grade ii morth-507/ar 8 providing and laying bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 509 complete in all respects grade ii morth-508(ar 9 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35the finished surface to be level, uniform and free from streaks and holes. rates are inclusive of all taxes, royalty etc, all t&p/machine material and labour required for proper completion of work. sor 2020 chapter 10 s.no.1 10 white washing with lime to give an even shade: three coats uppwd sor 2020/13.37.1 11 2.5% maintenance for 5 years of road work