tender for provision of all weather shelters at af station.; 1 schedule `a part - iis not prepriced by mes and prepriced rates indicates 0.0 under column 5 signified this fact only.(to be quoted by the contractor) bidders shall insert their lumpsum amount in the green coloured field under col-6 only.note:structural design of bldgs/structure and its construction covered under this schedule are to be done by contractor 2 lump sum price worked outfor(peb) pre engineeredbuilding (all weather shelter) as listed in sch a’ part i. 3 schedule ‘a’ part ii to v are under ser no. 2.00to 5.00. are prepriced by mes. bidders shall insert their lumpsum amount in the green coloured field under col-6 only. 4 lump sum price worked outfor excavation & earthwork as listed in sch `a’ part ii 5 lump sum price worked out for internal electrificationas listed in sch `a’ part iii 6 lump sum price worked out for road/path/hard standingas listed in sch `a’ part iv 7 lump sum price worked out for external electric supplyas listed in sch `a’ part v 8 schedule `a part-vi miscellaneous items of work(note for items 06 to 10: the contractor shall quote his rate for each of these items separately. the estimated rate is left blank since the same is not prepriced by mes) 9 supply and fixing air circulator fans 230 volts single phase oscillating 750mm sweep with metallic body and blades including clamps/nuts & bolts for fixing arrangements on steel pillars of hanger complete all as specified and directed 10 supply and fixing metal plug and socket with dbs consisting 8 module suitable for fixing mcb four pole 32a & rcbo 4 pole 3p+n+e complete all as specified 11 supply and fixing led highbay light 100 watt 230v ac indoor type round in shape with multiple optices and equipped with ip-66 protection, with impact and corrosion resistant complete with driver , lamp, clamp and connected accessories complete all as specified and directed 12 supply and laying sand cusioning of tibba sand for xlpe cable with screened and washed sand and punning to provide as required cover complete all as specified and directednote : punned thickness shall be considered in measurement of payment 13 supply & install testing and commissioningcuibical type dust and vermin proof ip 66 outdoor lt panel with ribbed type external surface, made of high quality crca 3.15mm characterised duly powder coated incl ms flat iron clamp/angle iron of size 40x40x6mm with nut, bolt washer etc shall be provided if required at site and mounted on suitable pcc plateform made of pcc 1:3:6 type c2 with 40 mm graded stone aggregateincluding250 amps aluminiumbus bar 4 pole with below metioned items, lifting 4 hook should be provided at top of panel, completeall as specified and as directed :-(a) bus bar of aluminium strips of 250 amps current rating capacity, length as actually required at site for 3 phase and half size for netural, mounted on epoxy/frp bus bar insulator 01 set .incoming :(a)mccb 125 amps tpn 16 ka, 415 v thermal meganetic release type- 01 nos. (b)multifunction meter digital typefor reading of voltage, current and power factor- 01 nos(c)led type indicator lamp red/yellow/blue colour- 03 nosoutgoing :(a) mccb 40a amps tpn 16 ka 415 volts thermal megnetic release type -03 nos(b) mcb dp 32a 220v for outgoing-02 nos(c) all outgoing feeder should be connected with suitable size of bus bar and internal wiring with copper conductor incl necessary lugs and thimbles