tender for new construction of missing link between vikas khand sataon manpur link road to duniyapat ka purwa - 1 construction of embankment with approved material obtained from borrow pits with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300.2 with lead up to 1000m as per technical specification clause 301.5. (excluding gst) 2 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density as per mord specification 401 (excluding gst) 3 providing, layingand spreading material on a prepared sub grade, adding cement @ 2% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at omc to achieve the desired unconfined compressive strength and to form a leyer of sub-base. (excluding gst) 4 providing ,laying and spreading material on a prepared sub-base, cement @ 4% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at omc to achieve the desired unconfined compressive strength and to form a layer of sub-base/base.(excluding gst) 5 providing and applying tack coat with bitumen vg-10using bitumendistributor at the rate of 0.30 to 0.40 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503. (excluding gst) 6 providing, laying & rolling of open graded premix surfacing of 20 mm thickness composed of 13.2 mm 5.6 mm aggregates either using penetration grade v.g.-10 to required line, grade level to serve as wearing course on a previously prepared base, including mixing by h.m.p., laying and rolling with a smooth wheel roller 8-10 tonne capacity finished to required level and grades.(material will be dumped at chanda h.m.p.) (excluding gst) 7 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c, including cost of material, labour, plant, machinery and t&p, all labour etc.completion as per pwd specification. (material will be dumped at chanda h.m.p.) (excluding gst) 8 excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3 (excluding gst) 9 construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1.(excluding gst) 10 construction of 300mm dia np3 h.p. culvert laying cement concrete pipe np3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets. (excluding gst) 11 construction of 600mm dia np3 h.p. culvert providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 1106. (excluding gst) 12 p.c.c grade m 10 (i) nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 (excluding gst) 13 brick masonry work in cement mortar in foundation complete excludingpointingand plasteringas per drawingand technical specifications clauses 600, 1 202 & 1 203 ii. brick masonry in 1:4 cement mortar (excluding gst) 14 pointing with cement mortar (1:3) on brickwork as per drawing and technical specification clauses 613.3 and 1204 (excluding gst) 15 piasteringwith cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification clauses 613.4 & 1 204 (excluding gst)