supply of fittings fabricated from plate_cs_as_ss supply of fittings fabricated from plate_cs_as_ss for p25 project at iocl panipat refinery , supply of fittings fabricated from plate-cs , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs, b16.9, bw ends, sch 40, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs ( nace+h2 ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, cs ( h2 ser. ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, cs ( h2 ser. ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs, b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs, b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs ( nace ) , mss sp-75, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , mss sp-75, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( h2 ser. ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, cs ( h2 ser. ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 90 deg, lr, cs ( galv. ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w ( galv. ) , add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, cs ( ibr ) , b16.9, bw ends, sch 30, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , elb, 90 deg, lr, cs ( ibr ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , elb, 90 deg, lr, cs ( ibr ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , elb, 90 deg, lr, cs ( ibr ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , elb, 45 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 45 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 45 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 45 deg, lr, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 45 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 45 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 45 deg, lr, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 45 deg, lr, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 45 deg, lr, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 45 deg, lr, cs ( h2 ser. ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 45 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 45 deg, lr, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , elb, 45 deg, lr, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , mitre bend, 90deg, 1.5d, 5 pieces, tkis drawing, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a672 gr.b60 cl.12, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for details of mitered elbow refer, doc. 6745-pip-000-tb-0003 , mitre bend, 90deg, 1.5d, 5 pieces, tkis drawing, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a672 gr.b60 cl.12, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for details of mitered elbow refer, doc. 6745-pip-000-tb-0003 , con red, cs ( galv. ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w ( galv. ) , add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , tee, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , tee, cs ( nace+h2 ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004, 4.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , mss sp-75, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( h2 ser. ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for run size , tee, cs ( galv. ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w ( galv. ) , add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , ecc red, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch std, lw, 100% radiography, maximum hardness in weld joint, shall be limited to 200 bhn, all welds shall be stress, releived, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch xs, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs, b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for higher size , ecc red, cs ( nace ) , mss sp-75, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , mss sp-75, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , ecc red, cs ( nace ) , b16.9, bw ends, sch non-std, lw, 100% radiography, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.schedule indicated is for higher size , supply of fittings fabricated from plate -as , elb, 90 deg, lr, as, b16.9, bw ends, sch std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch xs, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch xs, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch non-std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch non-std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch non-std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp5-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as, b16.9, bw ends, sch xs, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp9-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , elb, 90 deg, lr, as ( h2 ser. ) , b16.9, bw ends, sch 30, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp11-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, as ( h2 ser. ) , b16.9, bw ends, sch xs, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp11-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, as ( h2 ser. ) , b16.9, bw ends, sch non-std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp11-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 90 deg, lr, as ( h2 ser. ) , b16.9, bw ends, sch non-std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp11-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 45 deg, lr, as ( h2 ser. ) , b16.9, bw ends, sch 30, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp11-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , elb, 45 deg, lr, as ( h2 ser. ) , b16.9, bw ends, sch non-std, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp11-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , tee, as, b16.9, bw ends, sch xs, lw, 100% radiography, normalized & tempered, radiography shall be done, after stress relieving, weld factor e = 1.00, a234 gr.wp9-w cl.1, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.schedule indicated is for run size , supply of fittings fabricated from plate -ss , elb, 90 deg, lr, ss, dual, b16.9, bw ends, sch 80s, lw, 100% radiography, weld factor e = 1.00, a403gr.wp304 / 304l-wx, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , supply of cs welded fitting ( int. epoxy coated ) , elb, 90 deg, lr, cs, int epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , elb, 90 deg, lr, cs, int epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , elb, 90 deg, lr, cs, int epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , elb, 90 deg, lr, cs, int epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , elb, 45deg, lr, cs ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , con red, cs, ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.schedule indicated is for higher size , con red, cs, ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.schedule indicated is for higher size , tee, cs, ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.schedule indicated is for run size , ecc red, cs, ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.schedule indicated is for higher size , ecc red, cs, ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.schedule indicated is for higher size , elb, 90 deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 90 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch non-std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 45deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 45deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 45deg, lr, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 45deg, lr, cs ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , elb, 45 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , elb, 45 deg, lr, cs, ext epoxy ctd, b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for external coating requirements, refer doc. 6745-pip-000-ec-0022 , con red, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022, 4.schedule indicated is for higher size , tee, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022, 4.schedule indicated is for run size , tee, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022, 4.schedule indicated is for run size , tee, cs ( in+ex epoxy ) , b16.9, bw ends, sch std, lw, 100% radiography, external epoxy coated, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.for external coating requirements, refer doc. 6745-pip-000-ec-0022, 4.schedule indicated is for run size , tee, cs, ( int epoxy ctd ) , b16.9, bw ends, sch std, lw, 100% radiography, internal epoxy coated, weld factor e = 1.00, a234 gr.wpb-w, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023, 3.schedule indicated is for run size => limited