construction work of additional shed near rain basera athiya - providing and laying cement concrete in 1:6:12 (1 cement:6 fine sand:12 graded stone ballast 40 mm nominal size) and curing complete including cost of form work in foundation and floors.273 2 class - 150 brick work in 1:4 cement and c- sand of 2.25 fineness modulus mortar including supply of all materials,labour and t&p etc. required for proper completion of the work.but in super structure above plinth level up to floor two level(up to two stories) including necessary cutting and moulding of brick work as required 3 r.c.c. work in1:1.5:3 cement, coarse sand & 20 mm stone grite including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) 4 r.c.c. work in1:1.5:3 cement, coarse sand & 20 mm stone grite including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) 5 r.c.c. work inslab 1:1.5:3 cement, coarse sand & 20 mm stone grite including cost of material labour t&p and centring shuttering and binding and laying of reinforcement complete required for proper complition of work. (excluding cost of reinforcement) 6 mild steel or iron work in plane work in reinforce concrete(when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work and including supply of steel 7 12 mm thick plaster in single coat on fair side of single or half brick wall for plastering including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive (1 cement:4 finesand) 8 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plaster in up to floor two level including internal rounded angles not exceeding 80 mm in girth and finished even and smooth (1 cement:4 fine sand) 9 distempering two coat with oil bound distempering of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as berger, j&n shalimar, asian paints afterthoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth surface including cost of all materials.649+650 10 finishing walls with waterproofing cement paint of approved make such as super snowsem,durocem,guttucem supercem quality and of required shade on undecorated wall surface(two coat) over and including one coat white cement primer to give even shade after thoroughly brushing the surface.660+662 11 fabrication of mild steel or iron work of small size and section such as holding down bolts, hold fast tierods, grating etc wrought to including supply of steel and its wastage including cost of bolts, nuts if required for and welding grinding and making holes as required for proper completion of work angle iron 35x35x5 mm chaukhat frame & door shutters 12 supply & fixing mann or mahaveer or other approved (isimarked) z-section double leaf openable shutters steel window with required shish bars including supply and fixing of approved heavy quality ms hinges, handles 30 cm long staves and hold fast , and fabrication of window grills&railling 13 s/ layingofvitrified tiles in flooring of 600x600 mm sizewith water absorption less then 0.08% and conferming to is 15622 as per si no flooring item no 13 new item 14 sign board