tender for repair of rajkiya balika high shcool sehariyakala katra bazar gonda under project alankar yojana - r.c.cwork with cemet approved coarse sand and 2 cm guage appproved stone grite in the roportion of 1:1.5:3 in lintels of boundary wallof plinth band. excluding supply of rainforcement and itsfixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etcs.i nos 289 2 m.s work in r.c.c slab.(same qty item nos 1)*1.0*0.785504 (b) 3 40 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble sand in 5:1 as specified without base concrete as per si no 605 4 12 mm cement plaster 1 cement : 3 coarse sand in single coat on rough side of single or half brick wall for interior plastering up to floor two level including arrises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth. s.i. no. 583 5 distempering two coat after first coat or subsequent with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade including a brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials, as per s.i. no. 650+651 6 mild steel or iron work in heavy sizes such as truses, built up gates, door, frames, record rocks, roof work gates drilling holes, rivetting ror welding shere necessary and alos including supply of steel bolts nuts etc their fixing required for proper completion of work as per si no. 503 7 painting one coat for every coat of paint after first coat on every coat on steel and other metal surface previously painted old surface s.i. no. 646 8 finishing wall with water proofing cement of approved quality on previously old treated surface with this paint to be an even shade after throughly broosing the surface to remove all dirt and remains of loose powdered materials incuding curring and cost of all materials. as per s.i. no. 662 9 supply and fixing flush door commercial quality conforming to i.s. 2202 part 1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hings. bolts jocks, handles, springs, fitting with necessary screws to be supplied depatmently. s.i. no. 470(a)