tender for supply, installation of officer chair, almirah, metal rack & three seater chair in head office of “the fatehabad central co-operative bank ltd- 1 details 2 fixed chair : fixed visitor chair, overall dimension: 530w ±10 x 580d ±10 x 840h ±10 mm, seat & back of chair is made 12mm thick hot pressed plywood cushioned with pu moulded foam fabric upholstery, pvc beading used in seat & back, seat & back fixed with ms powder coated plate, used pu foam on seat of d-45 kg / m3, used foam on back of d-45 kg / m3, seat size: 460w ±10x 405d ±10 x 60thick. ±5 mm, back size: 460w ±10 x 415h ±10 x 60thick. ±5mm, armrest: armrest made of good quality injection moulded ppcp cover fixed with 16gauge powder coated round pipe of 25.4mm, armrest fixed with seat & back, under structure: cantilever frame made of 25.4mm round pipe with 14 gauge thickness duly powder coated with plastic bushes . 3 revolving chair:: medium back revolving chair, overalldimension:- 715w:1:10 x 715d :1:10 x 1020h :1:10 mm .seat of medium back chair is made of 12mm thick hot pressed plywood pasted with pu moulded foam with fabric upholstery on seat , used pu moulded foam on seat of d-45 kg / m3 , back of medium back chair is made of injection moulded pp material structure in black colour upholstered with mesh fabric , seat size: 510w :1:10 x 510d :1:10 x 60thick. :1:5 mm , back size:-460w :1:10 x 490h :1:10mechanism:- centre tilt mechanism single point control, pmvides maximum adjustability and scope for comfort , seat & back are fixed together with arms & whole structure moves together in one direction , single / upright position locking , tilt tension knob to loosen or tighten the tension according to users body weight .gaslift:- lift -used gaslift of 85 mm size of class- iv grade , pllastic gas lift cover .armrest:- fixed pp armrest in black colour, seat & back connected with arms .chair base & wheels:- revolving pedestal metalinserted ppcpbase consists of 5 prongs with 660:1:5 mm pitch circle diameter, 50mm dia. black nylon - twin wheel pin castor 4 almirah:: overall size 915w x 485d x 1980h , top , bottom , side panel & shelve made up of 0.8mm thick crca sheet powder coated , legs made up of 0.8mm thick crca sheet powder coated , shutter made up of 1mm thick crca sheet powder coated , no sharp edges of almirahends , all shelve rack divided into equal parts , door die cast chrome plated handles fitted with washer & double nut , handles ring made ofpvc cap , almirah all metallic panelsscrew with nut & bolt , all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of ( iron phosphating ) ( 0.4 – 0.8 ) gm / m² automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating . 5 slotted angle rack :: slotted angle rack overall size :- 900wx450dx1800h mm, angle made up of crca 40x40x2mm thick duly powder coated, shelve made up of crca 0.8 mm thick duly powder coated, corner plate made up of crca 1 mm thick duly powder coated, slotted angle rack should be supplied in knock-down condition , high quality ppcp shoes should be used on bottom to avoiding scratches on the floor , all metal components should be pre-treated with zinc phosphating in minimum 7 tank process and the powder coated with epoxy polyester with approved shade , thickness of coating should be minimum 50 microns . 6 three seater waiting chair ::dimensions : 200x60x30 cm, chrome plated, no. of seats -3, heavy-duty steel frame that is strong and stable. the frame is powder coated for added strength and durability and features adjustable legs for a perfect fit. the chair also features a breathable mesh backrest and upholstered armrests for extra support and comfort.