supply, fitting and fixing of furniture at newly constructed office building under wbcadc debra project, paschim medinipur during the f.y. 2025-26 , table : metal table office type, 1200 mm (w) x 750 mm (d) x 750 mm (h) with wright side three drwers and left side one cupboard, made in 25 mm x 25 mm x 1.20 mm thickness ms square pipe with pvc buffer &two side drawer made of 1.0 mm gauge crca sheet. top made of 19 mm century ply with both side laminate & 2 mm pvc edges banding. locking shall have 10 lever cam lock with lock lever plus option of hasp arrangement. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). , revolving chair with pu arm: description: mid back chair with center tilt synchrony mechanism, nylon pedestal, pp loop armrest seat assembly should be made of 105+/0.1 cm thick hot pressed plywood upholstered with fabric upholstered covers and molded polyurethane foam. the high resilient polyurethane foam is moulded with density 45+/22 kg/m3, and hardness 16+/2kgf as per is: 7888 for 25% compression. seat size 47.0 cm (w) x 48.0 cm x (d) & back size 47.5 cm (w) x58.0 cm (h). the chair should be 360 degree revolving type should have upright locking, tilit tension adjustment; seat/back tilting ratio should be 1:3. , steel almirah with 4 shelve & five comperment , oval all size -1980mm x 900mm x 475mm, the almirah shall be made from prime quality crca steel with anti rusting treatment. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.6 mm. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). , computer table, size - 1500x750x750, made of 19 mm century ply wood with both side laminate pesting, write side one drawer with cpu system & left side key board with one half shelve. , revolbing chair with arm: seat size 47.0cm (w) x 48.0cm x (d) & back size 47.5cm (w) x 58.0 cm (h). the chair should be 360 degree revolving type should have upright locking. mid back chair with center tilt synchrony mechanism, nylon pedestal, pp loop armrest seat assembly should be made of 105+/0.1cm thick hot pressed plywood upholstered with fabric upholstered covers and molded polyurethane foam. , revolbing chair with pvc arm: mid back chair with center tilt synchrony mechanism, nylon pedestal, pvc hard armrest seat assembly should be made of 105+/0.1cm thick hot pressed plywood upholstered with leatherite covers and molded polyurethane foam. the high resilient polyurethane foam is molded. the chair should be 360 degree revolving type should have upright locking, tilt tension adjustment, seat/back tilting ratio should be1:3. , executive table for ocs, size-2100 x 1200 x 750, made of 25 mm thick work top rest 18 mm thick century ply wood with both side laminate including hardware, side unit - 1200 x 400 x 750, back unit - 1650 x 400 x 750 including hardware. , steel slated angle rack, size - 1800x900x375, made of angle 14 gauge & shelve made of 20 gauge crca ms ssheet, the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). , curtain with fittings (door)