bids are invited for metal single bed - metal bed with 12mm thick ply wood topof size 2000mm x 915mm x450mm mild steel medium grade tube 50mm x 25mm, 1.2mm thickness and head board square tube 38.1mm x38.1mm x 1.2mm used in metal bedshall comply with is-7138 specification. tube and fitting shall be clearly finished straight and free scale, crack, surface flaws, lamination and other defects. tubeof any section including fittings used for manufacture shall be as per approveddesign .the long rails , short rails and legs will be tapered cut as approved.the ends of long rails, short rails and legs will be properly welded as per best trade practice.at lower end side and upper end side, between both legs should be covered by 12mm thick water proof pre laminated and decorated particle board, fixed on 25mm x25mm,1.2mm thick hollow section by suitable tapping screw .three additional stiffeners of mild steel tubing 50mm x25mmmed grade isi marked shall be welded joining long rails in the centre under the ply top.ply wood 12mm thick (exterior grade) water proof both side commercial, bwr grade will be fixed on top with ms gi nuts and bolts of required approved size, all mild steel member finishes with black powder coating 50 to 60 micron, test reports to be submit by the vendor before supply, warranty period of bed one year (make : bhavna, /eros/sai enterprises) , locker bed steel - powder coated 60 micronsteel almirah ( locker bed steel ) size 760mmx430mmx1120mm height including pedestal height 120mm with fixed type internal shelves 3 nos,01 nos inside locker dimension (wxdxh) 380mm x 430mm x 290mm with hinges and locking arrangement, main door leaf 02 nos using m.s sheet conforming to commercial quality cr- 1,grade 340 of is 513:2008(reaffirmed 2013)(fifth revision) amdt. no.1. door stiffner upto full door height provided, sheet thickness of side, back, top and bottom min 1.00mm,shelves thickness min 0.60mm, pedestal thickness min 1.00mm, ms sheet almirah door 1.00mm thick. alm