bids are invited for “l” shaped modular office table with back storage - size for front desk 1800mm (l) x1050mm (d)x 750mm (ht) in prescribed position and size for side unit1200 mm x 450 mm x 750 mm(ht) with 1 no 3 drawer pedestal unit of size 450mm x 515mm x 725mm (ht) and back storage unit size 1800mm (l) x 450 (d) x 750(h)along with one shelf making two compartments. the table top, back storage top and side unit top will be made of 25mm thick plain particle board as per is 3087 covered with 2 mm thick prelaminated particle board . the back side of table top and side unit top will be pasted with 0.8 mm thick balancing laminate. the side panel and modesty panel will be made of 18mm thick plpb .all exposed edges shall be lipped with minimum 1mm thick pvc edge banding. the outer structure of pedestal unit shall be made up of 18mm thick pre-laminated particle board conforming to is 12823 and the top panel shall be made of 25 mm thick pre laminated particle board conforming to is 3087. the back panel of pedestal unit shall be made up of 9 mm thick pre-laminated particle board (osl). all edges shall be lipped with 2 mm pvc edge band. three nos. powder coated metal drawer (hettich make or equivalent ) with sliding channels will be provided with 9mm thick pre-laminated particle board(osl) panel as base of each drawer. the unit is to be provided with common single point locking arrangement for all the drawers. drawers shall be provided with recessed anodized aluminum handles. total quantity : 1