carriage of the following material from store center kunera etawah to site of work under jurisdiction of edd-ii etawah through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.-2 pcc pole 9 / 8.5 mtrs. 3 conductor, gi earthwire, cross arm, insulator and other line material. 4 11 kv xlpe cable 1x185 sqmm 5 transformer 16 kva 6 transformer 25 / 63 kva 7 erection and grouting of 9 / 8.5 mtrs. long pcc pole duly grouted including necessories clamps, accessories required fixing of ht / lt fittings as per respo norms. the support shall be grouted in cement, sand and brick ballast. it including the cost of all labour, t&p etc. required for proper completion of work. 8 erection and grouting of double pole structure of 9 / 8.5 mtrs longpcc pole duly grouted including necessories clamps, accessories required fixing of ht / lt fittings as per respo norms. the support shall be grouted in cement, sand and brick ballast. it including the cost of all labour, t&p etc. required for proper completion of work. 9 installation of stay set with grouting and nuzzling etc. as per respo drawing / norms along with all routine material to be used for such works. 10 earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work. 11 mounting of 16 kva transformer on the single pole / double pole / plinth structures with connections thereof. 12 mounting of 25 / 63 kva transformer on the single pole / double pole / plinth structures with connections thereof. 13 laying, sagging and stringing and jumpering / binding etc. ofacsr weasel conductor in 11 kv / lt lines as per respo manual and as per direction of executive engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 14 digging, laying and back filling of 1x185 sqmm xlpe cable as per respo manual and as per direction of supervising engineer including the cost of arrangementof brick, sand, labour and t&p etc. required for proper completion of the work. 15 instalation of 11 k.v indoor / outdoor cable box with cable hoisting jumfering work etc. cable jointing kit will be provided by contractor at his own cost. 16 installation of 11 kv pin insulator with pin. 17 installation of 11 kv disk insulator with fitting. 18 installation oft off channel. 19 installation of top channel. 20 installation of droper channel. 21 installation ofbase angle. 22 installation of f clamp. 23 installation of dp clamp. 24 installation of nut bolt.