tender for under electricity distribution division iii, saifai, etawah, work will be done under deposit scheme item against various packages.- 1 carriage of the following material from store center kunera etawah to site of work under jurisdiction of edd-iii saifai etawah through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. 2 pcc pole 9/8.5 mtrs. 3 stp pole 4 conductor, gi earthwire, cross arm, insulator and other line material. 5 lt abc cable 6 transformer 25 kva 7 transformer 100 kva 8 erection and grouting of pcc/stp pole duly grouted including necessories clamps, accessories required fixing of ht/lt fittings as per respo norms. the support shall be grouted in cement, sand and brick ballast. it including the cost of all labour, t&p etc. required for proper completion of work. 9 installation of stay set with grouting and nuzzling etc. as per respo drawing /norms along with all routine material to be used for such works. 10 earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work. 11 mounting of 25 kva transformer on the single pole/double pole/plinth structures with connections thereof. 12 mounting of 100 kva transformer on the single pole/double pole/plinth structures with connections thereof. 13 laying, sagging and stringing and jumpering / binding etc. ofacsr weasel conductor in 11 kv/ lt lines as per respo manual and as per direction of executive engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 14 laying, sagging and stringing and jumpering / binding etc. oflt abc cable in 11 kv/ lt lines as per respo manual and as per direction of executive engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 15 installation of 11 kv pin insulator with pin. 16 installation of 11 kv disk insulator with fitting. 17 installation of droper channel. 18 installation ofbase angle.