tender for under the electricity distribution division ii, etawah, work will be done against various packages under the deposit scheme item.-- 1 carriage of the following material from store center kunera etawah to site of work under jurisdiction of edd-ii etawah through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. 2 pcc / stp pole 3 conductor, gi earthwire, cross arm, insulator and other line material. 4 lt abc cable 3x95+120 sqmm 5 transformer 25 / 63 kva 6 carriage of 33 kv xlpe cable of 3x300 sqmm 7 carriage of 11 kv xlpe cable of 3x185 sqmm 8 erection and grouting of pcc / stp pole duly grouted including necessories clamps, accessories required fixing of ht / lt fittings as per respo norms. the support shall be grouted in cement, sand and brick ballast. it including the cost of all labour, t&p etc. required for proper completion of work. 9 erection and grouting of double pole structure including necessories clamps, accessories required fixing of ht / lt fittings as per respo norms. the support shall be grouted in cement, sand and brick ballast. it including the cost of all labour, t&p etc. required for proper completion of work. 10 installation of stay set with grouting and nuzzling etc. as per respo drawing / norms along with all routine material to be used for such works. 11 earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work. 12 mounting of 16 / 25 / 63 kva transformer on the single pole / double pole / plinth structures with connections thereof. 13 laying, sagging and stringing and jumpering / binding etc. ofacsr weasel conductor in 11 kv / lt lines as per respo manual and as per direction of executive engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 14 laying, sagging and stringing and jumpering / binding etc. oflt abc cable in 11 kv / lt lines as per respo manual and as per direction of executive engineer including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work 15 installation of 11 kv x-arm. 16 installation of 11 kv pin insulator with pin. 17 installation of 11 kv disk insulator with fitting. 18 installation of droper channel. 19 installation ofbase angle. 20 installation of dp clamp. 21 installation of fuse set. 22 installation of 33 kv disk insulator with fitting. 23 installation of 33 kv bracing angle. 24 carriage of 33 kv xlpe cable of 3x300 sqmm 25 carriage of 11 kv xlpe cable of 3x185 sqmm 26 carriage of gi pipe 150 mm dia 27 digging, laying and back filling of 33 kv 3x300 sqmm xlpe all. cable as per respo manual and as per direction of supervising engineer including the cost of arrangementof brick, sand, labour and t&p etc. required for proper completion of the work. 28 instalation of 33 kv 3x300 sqmm indoor / outdoor cable box with cable hoisting jumfering work etc. cable jointing kit will be provided by contractor at his own cost. 29 digging, laying and back filling of 11 kv 3x185 sqmm xlpe all. cable as per respo manual and as per direction of supervising engineer including the cost of arrangementof brick, sand, labour and t&p etc. required for proper completion of the work. 30 instalation of 11 k.v 3x185 sqmm indoor / outdoor cable box with cable hoisting jumfering work etc. cable jointing kit will be provided by contractor at his own cost.