tender for lot no 24 s/efor renewal work of damagedcanalservice road of mansoorpur dy b/w k.m 8.291 to11.464(lot no 25) sl. no. item description 1 earth work in repairingcut & outer slope of bank. layers including remming and dressing 1.50m lift and 200 m lead. as directed by the engineer-in-charge. (including royality) (s.i.no.: 253(a) 2 brick lining on both side of the road of m-150 bricks 7cm wide 11cm deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the engineer-in-charge (s.i. 765) 3 providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam grade-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density, as per latest morth & mord specification ( by mechanical means) 4 providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per technical specification clause 502( by mechanical means). 5 providing & applying tack coat of bitumen emulsion (vg-10) with using emulsion distributor at the rate of 0.225 kg per sqm on the prepared granular surface treated with primer cleaned with hydroulic broom as per technical speficication. clause 503. ( by mechanical means) 6 20mm thick open-graded premix carpet using bituminous (penteration grade/modified bitumen) binder-providing, laying and rolling of open-graded premix surfacing of 20mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen vg-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a hot mix plant 120 tph capacitylaying by paver finisher hydrostatic with sensor controler suitable plant, laying and rolling with a smooth wheeld roller 8-10 tonne capacity, finished to required level and graded to be followed by seal coat as per latest morth & mord specification. 7 providing and mixing by hot mix plant 120 tph capacitylaying by paver finisher hydrostatic with sensor controler laying seal coat by mannual means with vg -10 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per latest morth & mord specification (by mechanical means) 8 painting white/coloured traffic lines 8-15 cm wide in three coats with approved road making paint (spirit base) as per directed by th engineer-in-charge including supply of all materials, labour, tools & plants etc required for proper completion of the work.