painting of various equipment and sheds at hmrbpl, erpl haldia pump station. phbts22040 / painting of various equipment and sheds at hmrbpl, erpl haldia pump station.- painting of mainline pumps, booster pumps, frames and staircases and its accessories:supply of all necessary materials like primer / paint etc., preparing surfaces and application of paint / primer of appropraite coat system as follows, at height up to 6m and in all position including the cost of scaffolding up to 6m, labour, tools & tackles, ppe, sundries, electricity charges, water charges & other utility charges, availability of dft meter for measuring paint thickness etc. final dft to be 125-150 microns. the vendor to submit paint mtc before starting of painting jobs. 2 high build epoxy zinc phosphate primer. 3 high build epoxy finish paint. 4 painting of mainline motor, booster motor and its accessories:supply of all necessary materials like primer / paint etc., preparing surfaces and application of paint / primer of appropraite coat system as follows, at height up to 6m and in all position including the cost of scaffolding up to 6m, labour, tools & tackles, ppe, sundries, electricity charges, water charges & other utility charges, availability of dft meter for measuring paint thickness etc. final dft to be 200-235 microns. the vendor to submit paint mtc before starting of painting jobs. 5 hb polymide cured epoxy primer to achive a minimumdft of 100 microns ( one or more coat of 100 μ each ) 6 hb epoxy intermediate to achive a minimum dft of 150-200microns ( two or more coats of 75 - 100 μ each ) . 7 aliphatic acrylic polyester polyurethane to achive aminimum dft of 50-75 microns ( one or more coats of50 -75 μ each ) . 8 steel scaffloding ( materials in contractors scope ) : the job includes supply of all scaffolding materials, transportation to work site, erection of scaffolding at site covering the areas specified as per isms-1007 safety standards and dismantling scaffolding after completion of job and taking away the scaffolding material including supply of all tools, tackles, consumables, labours and contractors supervision as directed by the engineer-in-chargenote:1. for measurement in sqm: 2 ( length + width ) x height area covered by the scaffolding is to be taken.2. scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs. 9 above 6m up to 10m height 10 finishing walls with acrylic smooth exterior paint of required shade : 11 new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm )