tender for procurement of different types of ht bolts, nuts, washers, thuds etc. for upcoming u4 overhauling at sgtpp under bm2 dept.-- 1 procurement of different types of ht bolts, nuts, washers, thuds etc. for upcoming u4 overhauling at sgtpp under bm2 dept. 2 allen bolt,ht,m10x45,grade 10.9 ( full thread application: for retainer of stop bolt of bowl mill xrp1003 make: tvs/unbrako/caparo ) 3 screw,socket hd cap,m16x60 ft,ht 12.9 for mill xrp1003 ( application:for fitting the bowl hub cover of mill xrp1003 make: tvs/unbrako/caparo ) 4 bolt,hex hd,m16x40,ft,gr 10.9,sp washer ( with plain washer, 10.9 application: for rj guard assemly of mill xrp1003+aph make: tvs/unbrako/caparo ) 5 bolt, soc hd, m24 x 90 ft grade 12.9 ht for clamping ring of coal mill xrp 1003 ( make: tvs/unbrako/caparo it may be 65mm threaded and 25mm unthreaded in lieu ft ) 6 ht hex head bolts,m24x110,grade-12.9 # ht hex head bolts size: m24x110 grade-12.9 as per is:1367 full thread ( with spring washer(12.9) application:for fastening nozzle ring with bowl hub through extension ring of mill xrp1003 make: tvs/caparo/unbrako ) 7 bolt ht m20x80 hex head full thread grade.10.9 ( with plain washer (10.9) application: for bolting upper skip liner and lower skip liner of mill xrp 1003 make: tvs/unbrako/caparo ) 8 ht bolt, hex head, m12 x 60mm ft for gr 10.9, with ht nut & washer ( application: for upper seal ring of mill xrp1003, aph door, hot pa duct door, id fan inspection door, hot spool of aph make: tvs/unbrako/caparo ) 9 bolt,ht hex head, m10x50 full thread,grade 10.9 ( with nut (10.9) application: used for lower seal ring of mill xrp1003 and aph door make: tvs/unbrako/caparo ) 10 bolt,ms,hex head,full thread,m12x40 ( with nut and washer application:feeder pocket door, mill oil checking door, mrhs big door make: tvs/unbrako/caparo/others ) 11 ms nut, bolt & washer. size:m12x65 # hex head, full thread ( with nut and plain washer application: mill, mrhs , etc make: tvs/unbrako/caparo/others ) 12 ms plain washer, is: 2016, size- m16 ( application: different areas of mill, boiler, etc make: tvs/unbrako/caparo/others ) 13 ht bolt, hex hd, m12 x 40mm ft, gr 10.9, ( make: labyrinth seal of mill xrp1003 make: tvs/unbrako/caparo ) 14 ht bolt,hex hd,m12x50mm ft,gr 10.9 # w/nut gr-8 & ms washer ( with nut (gr.10.9) and washer (gr.10.9) application:for bellow of pa fan, fd fan of stage-2, aph lop flange, aph door of stage-2 make: tvs/unbrako/caparo ) 15 fastener bolt m12x100 hex head full thread ( with nut(gr.10.9), bolt: gr 10.9, full thread application: for mdv locking, aph main motor base make:tvs/unbrako/caparo ) 16 bolt,allen hd,m16x50,ft,gr 10.9 ( with washer(gr.10.9) application: for journal head sealing make: tvs/unbrako/caparo ) 17 htbolt,hexhead,m20x120mmft,gr10.9w/htnut # ( with nut and washer, gr.10.9 application: for pv1, pv3, pv4 of mrhs make: tvs/unbrako/caparo ) 18 bolt,hex head ht,m18x50 ft property class-10.9,is:1364 ( bolt:m18x30 mm with washer, gr.12.9 application:for connecting knife guide with housing of pv3, pv4 in mrhs make: tvs/unbrako/caparo ) 19 bolts,nut and washer,m20x60,grade-10.9 # bolt with nut ht hex head bolts along with nut and washer size: m20x60 grade-10.9 as per is:1367 full thread ( application: for pv1 of mrhs make: tvs/unbrako/caparo ) 20 ht bolt m20x70 hex head,grade 10.9 full thread ( with washer (gr.10.9) application: for mdv door box up of mill xrp1003 make: tvs/unbrako/caparo ) 21 ht bolt m6x60 hex head,grade 10.9 full thread ( application: making fixtures for alignment make: tvs/unbrako/caparo ) 22 hex nut m6 # ( grade. 10.9, application: making fixtures for alignment make: tvs/unbrako/caparo ) 23 hexhead ft bolt+nut-ms-grad4. m16x60 # ( with plain ms washer application: at flange of coal conveying line of mrhs. make: tvs/unbrako/caparo/local made ) 24 nut & bolt,m16x75,ft,ms & washer # ( application: at flange of coal conveying line of mrhs. make: tvs/unbrako/caparo/local made ) 25 bolts,nut and washer,m10x40,grade-10.9 # ht hex head bolts along with nut and washer size: m10x40 grade-10.9 as per is:1367 full thread ( bolt: m10x40 with nut & washer . gr. of b+n+w is 8.8 application:for mounting scanner hose, oil gun hose and ignitor hose make:tvs/unbrako/caparo ) 26 stud,m16x70, ft,gr 10.9,ht, w/2 hex nut as per is:1862, ht stud with two nos heavy hex nuts, metric coarse, full thread. bolt grade: 10.9, nut grade: 10.0, bolt conforming to astm a193 / grade b7, nut conforming to astm a194 / grade 2h. ( stud 16x70mm, ft, with two nuts, gr.10.9 application:for fastening the coal nozzle of bhel 500 mw make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nuts ) 27 washer m16 ( washer size:id-17mm and od-50mm, thickness-3 mm, ht, gr.10.9 application: for 16mm stud for fastening the coal nozzle, aph radial sealing. make: tvs/unbrako/caparo/others ) 28 h.t bolts hex head (f.t),size:m-24x65 mm ( application:ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) 29 bolt,hex,ht,ft,m24x50,class:10.9 is:1364 ( application:ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) 30 bolt,hex head,ht,m24x200 pt property class-10.9,is:1364 ( full thread application:ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) 31 hex nut m24 # ( grade: 10.9 application:for m24 bolt at ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) 32 plain ht washer,m30 ( washer size:id:37mm, od:66mm, thickness:5mm ht,gr.10.9 application: at burner tilting lever of 500mw bhel boiler make: tvs/unbrako/caparo/others ) 33 hex head bolt m20x200 with nut # grade:10.9 ( bolt m20x200 with double nuts, gr.10.9, ft application:connection between pivot pin and nozzle reach rod of 500 mw bhel boiler. make: tvs/unbrako/caparo ) 34 washer, plain, ht, m20, for bolt gr 10.9 fit to m20 ht bolt grade 10.9, specification: as per is : 2016, hardness: conforming to 300 hv minimum, hardened washer ( applicatin: for fixing reach rod of 500 mw bhel boiler+ mill area. make: tvs/unbrako/caparo ) 35 bolt,ht,hex hd,m12x40,ft,gr 8.8 ( with double nuts & double washers application: reach door of 500mw bhel boiler make: tvs/unbrako/caparo ) 36 nut & bolt,m16x35,ft,gr 10.9,sp washer # ( bolt,m16x35,ft,gr 10.9 with double nuts application:radial and axial seal of paph, bypass seal of saph make: tvs/unbrako/caparo ) 37 fastener stud bolt,ht,m12x60 full thread,with 1 nut,grade 10.9 ( application:hot spool of paph & saph make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 38 bolt with nut,ht hex head ,size: m16x45 bolts along with nut & washer,grade-10.9 as per is:1367,full thread ( application: bypass seal of paph make: tvs/unbrako/caparo ) 39 studs with nut and washer 3/8x80 ft ( ht stud 8x80, gr.10.9 with two nuts application: aph cooler, stg-ii make: tvs/unbrako/caparo/ others in case of stud make: tvs/unbrako/ caparo in case of nut ) 40 fastener ht bolt m16x50 full thread grade 10.9 ( with ht nut, gr.10.9 application: aph radial seal, aph lop flange make: tvs/unbrako/caparo ) 41 bolt,m16x60 ( bolt hex 16x60, gr.10.9 with nut application:aph radial seal, aph door make: tvs/unbrako/caparo ) 42 ht bolt m16x100 hex head,grade 10.9 full thread ( with double nuts application:mill +paph axial seal make: tvs/unbrako/caparo ) 43 htbolt,hexhead,m20x100mmft,gr10.9w/htnut # ( with double nuts application: paph axial seal make: tvs/unbrako/caparo ) 44 hex head bolt m10x40 standard thread grade: 8.8 ( full thread, gr. 10.9 application:hag make: tvs/unbrako/caparo ) 45 htbolt,hexhead,m24x120mmft,gr10.9w/htnut # ( full thread application:sector plate at cold end & hot end in aph make: tvs/unbrako/caparo ) 46 bolt ht m36x110 with spring washer # class-10.9 ( full thread application: aph area make: tvs/unbrako/caparo ) 47 m16x 70mm ht bolt, nut & washer, gr.10.9 ( full thread application: pa fan, fd fan of stage-ii make: tvs/unbrako/caparo ) 48 bolt,hex head,ht,m12x40 ft property class-8.8/10.9,is:1364 ( nut & bolt: gr.10.9 application: pafan, fd fan make: tvs/unbrako/caparo ) 49 ht stud,m16x120,full thread dimension as per is:1862,fe type-a,material & mech properties as per is 1367 part-3 gr 10.9 ( ht stud,m16x120,full thread with two nuts, gr.10.9 application : different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 50 stud with 2nos. nuts of size: m20x130 # ( ht stud,m20x130,full thread with two nuts, gr.10.9 application : different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 51 stud,m20x160, ft,gr 10.9,ht w/2 hex nut as per is:1862, ht stud with two nos heavy hex nuts, metric coarse, full thread. bolt grade: 10.9, nut grade: 10.0, bolt conforming to astm a193 / grade b7, nut conforming to astm a194 / grade 2h. ( ht stud,m20x160,full thread with two nuts, gr.10.9 application : different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 52 stud,m24x200, ft,gr 10.9,ht w/2 hex nut # as per is:1862, ht stud with two nos heavy hex nuts, metric coarse, full thread. bolt grade: 10.9, nut grade: 10.0, bolt conforming to astm a193 / grade b7, nut conforming to astm a194 / grade 2h. ( ht stud,m24x200,full thread with two nuts, gr.10.9 application : different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 53 stud with double hex nut size m22x160 ht grade: 10.9 ( ht stud,m22x160,full thread with two nuts, gr.10.9 application : different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 54 bolt ht stud wth 2 heavy hex nut m12x100 grade-10.9 ( ht stud,m12x100,full thread with two nuts, gr.10.9 application : different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) 55 stud & nut,m10x120,ft,ss 304 &pl washer # ( ht stud,m10x120,full thread with two nuts, gr.10.9 application: different valves make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut )