tender for procurement of different types of ht botls, nuts, washers, studs etc to be used for unit-4 overhauling, sgtpp , procurement of different types of ht botls, nuts, washers, studs etc to be used for unit-4 overhauling, sgtpp , allen bolt,ht,m10x45,grade 10.9 ( full thread: m10x50mm, 10.9 application: for retainer of stop bolt of bowl mill xrp1003 make: tvs/unbrako/caparo ) , screw,socket hd cap,m16x60 ft,ht 12.9 for mill xrp1003 ( application:for fitting the bowl hub cover of mill xrp1003 make: tvs/unbrako/caparo ) , bolt,hex hd,m16x40,ft,gr 10.9,sp washer ( with plain washer (no spring washer), gr.10.9 application: for fitting rj guard assemly of mill xrp1003+aph make: tvs/unbrako/caparo ) , bolt, soc hd, m24 x 90 ft grade 12.9 ht for clamping ring of coal mill xrp 1003 ( application: for fastening the claming ring of mill xrp 1003 make: tvs/unbrako/caparo it may be full thread or may be 65mm threaded and 25mm unthreaded in lieu ft ) , ht hex head bolts,m24x110,grade-12.9 # ht hex head bolts size: m24x110 grade-12.9 as per is:1367 full thread ( application: for fastening nozzle ring with bowl hub through extension ring of mill xrp1003. make: tvs/caparo/unbrako ) , bolt ht m20x80 hex head full thread grade.10.9 ( with plain washer (10.9) application: for bolting upper skip liner and lower skip liner of mill xrp 1003 make: tvs/unbrako/caparo ) , ht bolt, hex head, m12 x 60mm ft for gr 10.9, with ht nut & washer ( application: for upper seal ring of mill xrp1003, aph door , hot pa duct door, id fan inspection door, hot spool of aph make: tvs/unbrako/caparo ) , bolt,ht hex head, m10x50 full thread,grade 10.9 ( bolt, ht hex head, m10x65 full thread, grade 10.9 with nut (10.9) application: used for lower seal ring of mill xrp1003 & aph door make: tvs/unbrako/caparo ) , bolt,ms,hex head,full thread,m12x40 ( with nut and washer application:feeder pocket door, mill oil checking door, mrhs big door make: tvs/unbrako/caparo/ others ) , ht bolt, hex hd, m12 x 40mm ft, gr 10.9, ( application: labyrinth seal of mill xrp1003 make: tvs/unbrako/caparo ) , ht bolt,hex hd,m12x50mm ft,gr 10.9 # w/nut gr-8 & ms washer ( with nut (gr.10.9) and washer (gr.10.9) application:for bellow of pa fan, fd fan of stage-2, aph lop flange, aph door of stage-2 make: tvs/unbrako/caparo ) , fastener bolt m12x100 hex head full thread ( with nut(gr.10.9), bolt: gr 10.9, full thread application: for mdv locking, aph main motor base make:tvs/unbrako/caparo ) , bolt,allen hd,m16x50,ft,gr 10.9 ( with washer(gr.10.9) application: for fitting sealing ring with journal head make: tvs/unbrako/caparo ) , htbolt,hexhead,m20x120mmft,gr10.9w/htnut # ( it will be m20x130. with nut and washer, gr.10.9 application: for pv1, pv3, pv4 of mrhs make: tvs/unbrako/caparo ) , bolt,hex head ht,m18x50 ft property class-10.9,is:1364 ( it will be m18x30 bolt:m18x30 mm with washer, gr.12.9 application:for connecting knife guide with housing of pv1, pv3, pv4 in mrhs make: tvs/unbrako/caparo ) , bolts,nut and washer,m20x60,grade-10.9 # bolt with nut ht hex head bolts along with nut and washer size: m20x60 grade-10.9 as per is:1367 full thread ( application: for pv1 of mrhs make: tvs/unbrako/caparo ) , ht bolt m20x70 hex head,grade 10.9 full thread ( with washer (gr.10.9) and nut application: for mdv door box up of mill xrp1003/mpo base bolt make: tvs/unbrako/caparo ) , ht bolt m6x60 hex head,grade 10.9 full thread ( application: making fixtures for alignment make: tvs/unbrako/caparo ) , hex nut m6 # ( grade. 10.9, application: making fixtures for alignment make: tvs/unbrako/caparo ) , hexhead ft bolt+nut-ms-grad4. m16x60 # ( it will be m 16x 75, gr. 4.6 with plain ms washer and nut application: at flange of coal conveying line of mrhs. make: tvs/unbrako/caparo/others ) , nut & bolt,m16x75,ft,ms & washer # ( it will be m 16x80 with nut and plain washer, gr. 4.6 application: at flange of coal conveying line of mrhs. make: tvs/unbrako/caparo/others ) , bolts,nut and washer,m10x40,grade-10.9 # ht hex head bolts along with nut and washer size: m10x40 grade-10.9 as per is:1367 full thread ( m10x40 with nut & washer . gr. of b+n+w is 8.8 application:for mounting scanner hose, oil gun hose and ignitor hose make:tvs/unbrako/caparo ) , stud,m16x70, ft,gr 10.9,ht, w/2 hex nut as per is:1862, ht stud with two nos heavy hex nuts, metric coarse, full thread. bolt grade: 10.9, nut grade: 10.0, bolt conforming to astm a193 / grade b7, nut conforming to astm a194 / grade 2h. ( stud 16x70mm, ft, with two nuts, gr.10.9 application:for fastening the coal nozzle of bhel 500 mw make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nuts ) , h.t bolts hex head (f.t),size:m-24x65 mm ( application:ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) , bolt,hex,ht,ft,m24x50,class:10.9 is:1364 ( application:ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) , bolt,hex head,ht,m24x200 pt property class-10.9,is:1364 ( application:ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) , hex nut m24 # ( application:for m24 bolt at ccp outlet gate near coal nozzle of bhel 500 mw make: tvs/unbrako/caparo ) , plain ht washer,m30 ( washer size:id:37mm, od:66mm, thickness:5mm ht,gr.10.9 application: at burner tilting lever of 500mw bhel boiler make: tvs/unbrako/caparo/others ) , hex head bolt m20x200 with nut # grade:10.9 ( bolt m20x200 with double nuts, gr.12.9, ft application:connection between pivot pin and nozzle reach rod of 500 mw bhel boiler. make: tvs/unbrako/caparo ) , washer, plain, ht, m20, for bolt gr 10.9 fit to m20 ht bolt grade 10.9, specification: as per is : 2016, hardness: conforming to 300 hv minimum, hardened washer ( applicatin: for fixing reach rod of 500 mw bhel boiler+ mill area. make: tvs/unbrako/caparo, gr. 12.9 ) , bolt,ht,hex hd,m12x40,ft,gr 8.8 ( with four nuts & double washers, gr.8.8 application: reach door of 500mw bhel boiler make: tvs/unbrako/caparo ) , nut & bolt,m16x35,ft,gr 10.9,sp washer # ( it will be m16x40 ft,gr 10.9 with double nuts and plain washer application:radial and axial seal of paph, bypass seal of saph make: tvs/unbrako/caparo ) , fastener stud bolt,ht,m12x60 full thread,with 1 nut,grade 10.9 ( application:hot spool of paph & saph make: tvs/unbrako/caparo/others in case of stud make: tvs/unbrako/caparo in case of nut ) , bolt with nut,ht hex head ,size: m16x45 bolts along with nut & washer,grade-10.9 as per is:1367,full thread ( application: bypass seal of paph make: tvs/unbrako/caparo ) , fastener ht bolt m16x50 full thread grade 10.9 ( with ht nut, gr.10.9 application: aph radial seal, aph lop flange make: tvs/unbrako/caparo ) , bolt,m16x60 ( bolt hex 16x60, gr.10.9 with double nuts application:aph radial seal, aph door make: tvs/unbrako/caparo ) , ht bolt m16x100 hex head,grade 10.9 full thread ( with double nuts application:mill +paph axial seal make: tvs/unbrako/caparo ) , htbolt,hexhead,m20x100mmft,gr10.9w/htnut # ( with double nuts application: paph axial seal make: tvs/unbrako/caparo ) , hex head bolt m10x40 standard thread grade: 8.8 ( full thread, gr. 10.9 with nut application:hag make: tvs/unbrako/caparo ) , htbolt,hexhead,m24x120mmft,gr10.9w/htnut # ( full thread application:sector plate at cold end & hot end in aph make: tvs/unbrako/caparo ) , m16x 70mm ht bolt, nut & washer, gr.10.9 ( full thread application: pa fan, fd fan of stage-ii make: tvs/unbrako/caparo ) , bolt,hex head,ht,m12x40 ft property class-8.8/10.9,is:1364 ( nut & bolt: gr.10.9 application: pafan, fd fan make: tvs/unbrako/caparo ) , bolt m16x265 with nut & washer for dresser coupling at coal mill drop pipe ,half thread, ht, gr.10.9 ( bolt m16x265 with nut & washer for dresser coupling at coal mill drop pipe ,half thread, ht, gr.10.9, make: unbrako/caparo/ tvs ) , fastener ht bolt m20x100 hex head part thread,grade 10.9 ( full thread with plain washer, ht, gr.10.9 application: mpo base bolt, make: unbrako/caparo/ tvs ) , bolt,m20x60 ( with plain washer, ht, gr.10.9, full thread application: at mpo top /mdv base bolt for mill xrp 1003 make: unbrako/caparo/ tvs ) , ms bolt m20x45 with plain washer,gr 4.6 for fastening coal chute at stage-2 ,full thread ( application: at coal feeder chute of mill xrp 1003 make: tvs/unbrako/caparo/others ) , bolt,hex head,ht,m16x70 ft property class-8.8/10.9,is:1364 ( bolt m16x70 with nut & plain washer, ht, gr. 10.9 application: at flanges (chute bottom flange with drop pipe flange), mill xrp 1003 / pa & fd fan make: unbrako/caparo/ tvs ) , fastener ms stud m16?110,pitch 2mm ( ms stud m16x160 with double nuts, gr.4.6 application: for butterfly valves at air header to supply air to mdv & power cylinder of mdv for mill xrp 1003 make: tvs/unbrako/caparo/others ) , ms bolt m16x45 with nut, gr 4.6 for stage-2 mrhs conveying line ,full thread ( it will be bolt m16x60 with nut, gr 4.6 application: for fastening flanges at mrhs conveying line for mill xrp 1003 make: tvs/unbrako/caparo/others ) , ht nut m8 hex, grade 8.8 ( ht nut m8 hex, grade 8.8 make: tvs/unbrako/caparo ) , bolt,allen hd,m12x30,ft,gr 10.9 ( bolt,allen hd,m12x30,ft,gr 10.9 make: tvs/unbrako/caparo ) , washer m24 ms ( make: tvs/unbrako/caparo, ht, gr.10.9 ) , washer punched plain a16 ( washer size:id-17mm and od-50mm, thickness-3 mm, ht, gr.10.9 application: for 16mm stud for fastening the coal nozzle, aph radial sealing. make: tvs/unbrako/caparo/others ) , fastener ht stud m16x60 grade 10.9 ( stud bolt m16x60 ht grade:10.9 with double nut make: tvs/unbrako/caparo ) , washer m24 ms ( gr. 10.9 for m24 ht bolt make: tvs/unbrako/caparo ) , ss bolt ( ss bolt 304 with nut & washer, m10 x 100 application: for fustening net at bottom ash hopper make: tvs/unbrako/caparo ) , coupling bolt # hex bolt (24x95 ) for coal mill xrp1003 coupling bolt # hex bolt (24 mm.); length - 95 mm with 01 no. nylock nut & 01 no of en8 bush. ( appplication: mill (xrp 1003) motor to input shaft make: tvs/unbrako/caparo ) , cap screw,hex soc,m30x3.5,l230 bhel ( ht,cap screw,soc , m30x3.5 , l-230 ,1/3 threaded,grade 12.9 ; as per is:2269, din:912,iso:4762/threads iso metric 4g6g as per is:4218, iso 261,iso 965/prop class 12.9/mat. high grd alloy steel application: fastening the upper & lower journal housing of rja of mill xrp 1003 make: tvs/unbrako/caparo )