state health transport organization repairing of wall painting fixing wall tiles at corridor and rooms of shto- 1 stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. . 2 ( a ) applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion ( 1 bonding agent : 4 water : 6 cement ) as per manufacturersspecification [ cement to be supplied by the department ] 3 plaster ( to wall, floor, ceiling etc. ) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary ( ground floor ) . [ excluding cost of chipping over concrete surface ] . 4 ( i ) with 1:6 cement mortar. 5 ( b ) 20 mm. thickplaster. 6 ( i ) with 1:6 cement mortar. 7 ( b ) 20 mm. thickplaster. ( add. above ground floor - 1st. floor ) 8 ( i ) with 1:6 cement mortar. 9 ( b ) 20 mm. thickplaster. ( add. above ground floor - 2nd floor ) 10 ( i ) with 1:6 cement mortar. 11 ( b ) 20 mm. thickplaster. ( add. above ground floor - 3rd floor ) 12 supplying, fitting & fixing 1st quality ceramic tiles inwalls and floors to match with the existing work & 4 nos. of key stones ( 10mm ) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. 13 ( b ) wall with sand cement mortar ( 1:3 ) 15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg / sq.m. & joint filling using white cement slurry @0.20kg / sq.m. 14 ( b ) area of each tile the above 0.09sq.m. 15 ( i ) coloured decorative. 16 ( b ) wall with sand cement mortar ( 1:3 ) 15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg / sq.m. & joint filling using white cement slurry @0.20kg / sq.m. 17 ( b ) area of each tile the above 0.09sq.m. 18 ( i ) coloured decorative. ( add. above ground floor - 1st. floor ) 19 ( b ) wall with sand cement mortar ( 1:3 ) 15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg / sq.m. & joint filling using white cement slurry @0.20kg / sq.m. 20 ( b ) area of each tile the above 0.09sq.m. 21 ( i ) coloured decorative. ( add. above ground floor - 2nd floor ) 22 ( b ) rendring the surface of walls and ceilingwith white cement based wall putty of approved make and brand ( 1.5mm thick ) . 23 synthetic distemper to interior wall, ceiling with a coat of solventbased interior grade acrylic primer ( as per manufacturersspecification ) including cleaning and smoothning of surface.two coats 24 dismantling r.c.floor, roof, beams etc. including cutting rods and removing rubbish as directed with in a lead of 75 m. including stacking of steel bars. 25 ( a ) in ground floor including roof. 26 ordinary cement concrete ( mix 1:1.5:3 ) with graded stone chips ( 20mm nominal size ) excluding shuttering and reinforcement, if any, in ground floor as per relevant codes. 27 ( i ) pakur variety.