procurement of different types of formed shim and classifier link rod for mill procurement of different types of formed shim and classifier link rod for mill xrp1003 under bm2 dept. at sgtpp , procurement of different types of formed shim and classifier link rod for mill xrp1003 under bm2 dept. at sgtpp , link rod assemblyfor classifier blade of bowl mill xrp 1003 rod length: 708 mm, rod dia: 12.5mm, plate length: 545 mm, plate width: 34 mm, plate thickness: 10 mm, no of holes: 4, pitch of holes: 162 mm, 4 nos of csk bolt: m40x10 with nut, moc: shailhard ( moc[pmi data]: link rod:fe 99.24,mn 0.65,ni 0.103 plate:fe 99.5,mn 0.5 ) , shim,upper brg keeper,roller journal bhel ( od: 596mm, id: 464mm, no of holes: 16, hole dia:29mm, pcd: 535, moc: ss 304. 1 set=8 nos. (0.35mm=2nos, 0.25mm=1no, 0.20mm=4nos, 1.30mm=1no) ) , shim,uper journal,housing,roller journal bhel ( shim between upper journal bearing housing and lower journal bearing housing, od:845mm, id:615mm, pcd:738, no of larger holes: 12, no of smaller holes:4, dia of larger hole:35mm, dia of smaller hole:16mm, 1 set= 8 nos.(0.05mm=2nos, 0.01m=2nos, 0.20mm=1no, 0.30mm=1no, 0.50=1no ,1.00mm=1no, moc: ss 304 ) , shim,journal brg keeper,roller journal bhel ( shim for lower journal bearing, od:247mm, id:31.5mm, no of holes:3, hole dia: 26.5mm, pcd: 178mm, moc: ss304, 1 set=6 nos ( 0.20mm=1no, 0.30=1no, 0.35mm=1no, 0.40mm=1no, 0.50mm=1 no, 1.00mm=1no) ) , shim,air seal ring upper, pulv xrp1003 for journal head &trunnion shaft assy of xrp1003 ( od: 629mm, id: 500mm, no of holes: 8, hole dia:18.5mm, pcd: 591, moc: ss 304. 1 set=7 nos.(0.80mm=1no, 0.15mm=1no, 0.20mm=1nos, 0.40mm=2nos, 0.60mm=2nos) ) => limited