tender for repair to road under age b / r-i at ge dipatoli; 1 repair to pot holes any depth n. exc 1 sqm each incl sweeping free from dust and mud, water scoring sunken surface in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling screened and graded road metal watering and well ramming ( incl supply of road metal ) complete all as specified and directed 2 scarifying or picking gravelled macadam or bituminous macadam surface in area n exc 400 sqm and n exc 50 mm deep completeall as specified and directed 3 screening road metal, chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring ( materials from both sides of screen measured ) completed all as specified and directed.. 4 material and labour for 75mm thick, compacted thickness ( granite, trap, basalt ) wbm, with coarse aggregates of grading 2 ( 63 to 40mm size ) or of grading 3 ( 50 to 20mm size ) , spread, rolled and consolidated to gradientand camber required complete all as specified and as directed by engr-in-charge. 5 description all as per srl item no 4 above but except materialscomplete all as specified and as directed by engr-in-charge.. 6 m&lfor preparation of surfaces bywire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and applying a priming coat of bitumen primer @ 10kg / 10 sqm of paving bitumen of grade vg-10completed all as specified and directed. 7 material and labour forpremix bituminous paving bitumen any penetration , macadam, laid / rolled and compacted to required gradient and camber ( consolidatedthickness 75 mm ) and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed. 8 m&l of preparation of existing black top surfaces by wire brushing for removing caked mud etc andsweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and applying a priming coat of bitumen primer @5 kg / 10 sqm of paving bitumen of grade vg-10 completed all as specified and directed.. 9 material and labour for bituminous premix asphalticdense concrete 40mm consolidated thickness by using mechanical pavers with 5.5% binder content ( vg-30 ) as in semi dense asphaltic concrete rolled and compacted to required camber & gradients with 8 to 12 tones power road roller to a uniform smooth surfaces completed all as specified and directed 10 supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of pmma and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 ( 150x150x300mm ) type b1 complete all as specified and directed 11 supply and fixingfor cat eye solar reflective type ofmetal body alloy of size 100mm x 100mm x 20mmwith pama striplens reflector of model no. da972.0 fixed with and incl ms stud of suitable sizeas per manufactures instructions. complete all as specified and directed. 12 m&l for preparing bituminous surface of road and marking 2.5mm thickcentre lines, stop lines, dashes, arrows etc and the like n exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to bs 3262-1989 with special applicator machine all as per manufactures instructioncomplete all as specified and directed. 13 s&f steel work in tubular trusses including special shaped washer etc complete using erw or induction butt welded tubes confirming to i.s. 1161-1998