tender for special repair to certain roads under age b / r-ii at ge babina; 1 m&l for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning to cleaned surfaces with air compressor to remove all loose dirt etc and making true dust free surface, applying evenly a priming / tack coat with bituminous primer ( paving bitumen vg-10 ) @ 5 kg per 10 sq metre on existing black top and providing bituminous semi dense concrete ( design mix ) 30 mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen vg-30 laid / spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. 2 scarifying or picking gravelled, wb macadam or bituminous macadam surfaces in areaexc 400 sqm and exc 50mm but n exc 100 mm deep complete all as specified and directed. 3 m&l for 7.5cm thick ( compacted thickness ) wbm, with coarse aggregates of grading 2 ( 63 to 40mm size ) or of grading 3 ( 50 to 20mm size ) , spread, rolled and consolidated to gradient and camber required ( of grading as specified ) type of stone granite / trap / basalt and including screening with moorum, watered, consolidated and compacted each layer separately to the required gradient and camber with 8 to 10 tonne power rollercomplete all as specified and directed. 4 m&l for preparingunsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc , sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed. 5 m&lfor paving bitumen evenly a priming / tack coatwith vg-10, bituminous primer at 10 kg per 10 sqm meters on wbm surface complete all as specified and directed. 6 m&l for providing bituminous semi dense ( design mix ) 40mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen vg-30 laid / spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 12 tonne power roller and compacted to requiredcamber and gradient complete all as specified and directed. 7 m and l for sand stone kerb of roughly squared stones of size 20cm x 30cm, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush complete all as specified and directed. 8 m&l for preparing bituminuos surface of road and making 2.5mm thick center line, stop lines, dashes, arroows etc. and the like n.exc 10cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to bs 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. 9 m&l moorum / red bajri filling in floors / pavings, laid in layers not exe 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed