supply of austenitic steel coil 1.25x1250mm., as per drawing / specification: rdso spec. no. c- k201, grade x5crni1810 ( 304 ) table 1&2, heat treatment condition 2b as per table-5., packing instruction: the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i ) coil should be wrapped with a layer of water proof paper through out whole length. ii ) coil should be wrapped with a layer of biodegradable sheet. iii ) outer & inner of coil should be wrapped with gi sheet. iv ) side of the coil should be covered with card board sheet. v ) after this whole coil should be wrapped with biodegradable plastic sheet of suitable thickness. vi ) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii ) outer edge of the coil should be wrapped with gi ring. viii ) coil should be securely strapped with minimum 5 steel bands through the eyes of the coil and minimum 3 steel bands on the circumference of the eye. ix ) whole coil should be mounted on wooden blocks for easy lifting / stacking. x ) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi ) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. mechanical damage & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ] , austenitic steel sheet 3x1250x3300 mm., as per drawing / specification: rdso spec. no. c-k201, grade x5crni1810 ( 304 ) table 1&2, heat treatment condition 2b as per table-5., packing instruction: i ) the sheets / plates shall be supplied in bundles of optimum weight: 2mt+ / -10% & each sheet / plate shall be separated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii ) all bundles shall have a minimum of 2 hoops up to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid ( wooden packing under neath ) to facilitate handling. mechanical damage & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ] , austenitic steel coil 2x1250mm., as per drawing / specification: rdso spec. no. c- k201, grade x5crni1810 ( 304 ) table 1&2, heat treatment condition 2b as per table-5., packing instruction: the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i ) coil should be wrapped with a layer of water proof paper through out whole length. ii ) coil should be wrapped with a layer of biodegradable sheet. iii ) outer & inner of coil should be wrapped with gi sheet. iv ) side of the coil should be covered with card board sheet. v ) after this whole coil should be wrapped with biodegradable plastic sheet of suitable thickness. vi ) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii ) outer edge of the coil should be wrapped with gi ring. viii ) coil should be securely strapped with minimum 5 steel bands through the eyes of the coil and minimum 3 steel bands on the circumference of the eye. ix ) whole coil should be mounted on wooden blocks for easy lifting / stacking. x ) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi ) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. mechanical damage & corrosion during transit if any shall be at the cost of supplier [ warranty period: 30 months after the date of delivery ] , austenitic steel coil 1.7x1100mm., as per drawing / specification: rdso spec. no. c- k201, grade x5crni1810 ( 304 ) table 1&2, heat treatment condition 2b as per table-5., packing instruction: the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i ) coil should be wrapped with a layer of water proof paper through out whole length. ii ) coil should be wrapped with a layer of biodegradable sheet. iii ) outer & inner of coil should be wrapped with gi sheet. iv ) side of the coil should be covered with card board sheet. v ) after this whole coil should be wrapped with biodegradable plastic sheet of suitable thickness. vi ) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii ) outer edge of the coil should be wrapped with gi ring. viii ) coil should be securely strapped with minimum 5 steel bands through the eyes of the coil and minimum 3 steel bands on the circumference of the eye. ix ) whole coil should be mounted on wooden blocks for easy lifting / stacking. x ) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi ) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. mechanical damage & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]