supply of face milling cutter rh for milling of railway axle ends in cup turning machine of axle machine shop. the cutter shall have 16 pockets ( 15 pockets are for milling inserts to designation span 1504 edr sm40 & span 1504 edl p-40, and one pocket is for wiper insert to designation spex 1504 edr-1&spex 1504 edl-1 ) . the cutter pocket shall accomodate shim, shim screw, axial support, wedge for insert, wedge for axial support and wedge screw. cutter shall be capable of milling 10 mm material per pass with a surface finish of 6.3 ra milling cutter to part number s-r265. 2-315-40 along with the following spares to part numbers. 1 ) shim-265.2-839, qty-150nos 2 ) shim screw-265.2-824 qty-150 nos 3 ) axial support ( rh cutter ) -265.2-843 qty-25 nos 4 ) wedge for insert-265.2-851 qty-25 nos 5 ) wedge for axial support-265.1-825 qty-25 nos 6 ) wedge screw-269-823 qty-150 nos make:- sandvik asia ltd only [ warranty period: 30 months after the date of delivery ] , face milling cutter lh for milling of railway axle ends in end milling machine of axle machine shop. the cutter shall have 16 pockets ( 15 pockets are for milling inserts to designation span 1504 edr sm40&span 1504 edl p-40, and one pocket is for wiper insert to designation spex 1504 edr-1&spex 1504 edl 1 ) . the cutter pocket shall accommodate shim, shim screw, axial support, wedge for insert, wedge for axial support and wedge screw. cutter shall be capable of milling 10 mm material per pass with a surface finish of 6.3 ra milling cutter to part number s-l265. 2-315-40 along with the following spares to part numbers. 1 ) shim-265.2-839, qty-150nos 2 ) shim screw-265.2-824 qty-150 nos 3 ) axial support ( lh cutter ) -265.2-843 qty-25 nos 4 ) wedge for insert-265.2-851 qty-25 nos 5 ) wedge for axial support-265.1-825 qty-25 nos 6 ) wedge screw-269-823 qty-150 nos make:- sandvik asia ltd only [ warranty period: 30 months after the date of delivery ]