replacement of damaged conveyor belt in np plant and offsite area , fact cd . , replacement of damaged conveyor belt in np plant and offsite area , fact cd . , replacement of conveyor belt of width 750 mm in np / os area . [more than 25 meters] work involves: the new conveyor belt from cd - store / old usable belt from site shall be transported and unloaded at required site . damaged old belt shall be removed after arresting the gravity take up . the new belt shall be pulled in , full length or part [ more than 25 meters] and placed properly to suit with site condition . the arrangements like idler / frame dismantling , wooden planks fixing , belt supporting etc . shall be done for splicing / mechanical jointing of conveyor belt . splicing / jointing of conveyor belt is not in the scope of contractor . the conveyor belt shall be released after the curing of joint / getting clearance . removed idlers / frames shall be fixed back properly . trail run of the conveyor belt shall be taken on load , with out any sway . balance belt roll shall be transported to storage area near offsite . scrap conveyor belts shall be transported to scrap yard after cutting and rolling the same into smaller bundles as per instructions . , arrangements for repair / new splice joint of conveyor belt 750 mm width in np / os area . [up to 25 meters] work involves: the new conveyor belt from cd - store / old usable belt from site shall be transported and unloaded at required site . damaged old belt shall be removed after arresting the gravity take up . the new belt shall be pulled in , full length or part [ up to 25 meters] and placed properly to suit with site condition . the arrangements like idler / frame dismantling , wooden planks fixing , belt supporting etc . shall be done for splicing / mechanical jointing of conveyor belt . splicing / jointing of conveyor belt is not in the scope of contractor . the conveyor belt shall be released after the curing of joint / getting clearance . removed idlers / frames shall be fixed back properly . trail run of the conveyor belt shall be taken on load , with out any sway . scrap conveyor belts shall be transported to scrap yard after cutting and rolling the same into smaller bundles as per instructions . , replacement of damaged skirt of product conveyors . work involves: damaged skirt of product conveyors chute at two sides shall be removed and replaced with new one . maximum length of skit shall be 15 mtrs . scrap conveyor belts shall be transported to scrap yard . [ one set means two skirts of one chute . ]