tender for supply of equipment / material , design, erection, testing commissioning for sop to d.r.d.a. for fish feed unit at maredi by prov. 11 / .4 kv 25 kva s / stn. a / w 11 kv ht line section maredi under esd chamba-ii ed chamba--- 1 supply part of 11/.4 kv 25 kva distribution sub station 2 11/.4 kv 25kva dtr (rec sep. ord 11/1976 3 prov. st polepole 10 mtr. long w/l 200 kgs 4 muff for steel tubular pole with concrete filling 5 x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line 6 ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ) 7 x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch 8 x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed 9 x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer] 10 ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no. 11 ms angle iron (35x35x5 mm), length : 460 mm x 2 nos 12 ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing 13 ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly 14 ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly 15 g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly 16 g.o ab switch unit (11kv,400,663ka) tripple pole o/d type 17 d.o fuse unit 18 surge arrester, 9 kv station class 19 discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.) 20 stay set complete 21 staywire (7/3.15mm)( 10 kg per stay set) 22 pipe earthing with gi,charcoal & salt 23 prov. lt distribution panel with mccb (10 a, 10 ka, 4p,1 no.) & sfu (32 a 4 no. rewireble) for 63 kva trf. as per specification 24 half clamp (m.s. flat 50x6) 25 full clamps (m.s. flat 50x6) 26 m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) 27 aluminium thimbles 28 copper thimble 29 danger plate 30 barbed wire (rec sp f 3/1981) 31 lt cable 3-1/2 core-185mm sq. 32 alluminium paint 33 prov.acsr, 6/1/3.35 mm 34 prov.63kva s/stn structure protection a/w chain link fencing, angle iron gate etc. for dtr fencing. 35 erection part of 11/.4 kv 25 kva distribution sub station 36 11/.4 kv 25kva dtr (rec sep. ord 11/1976 37 prov. st polepole 10 mtr. long w/l 200 kgs 38 muff for steel tubular pole with concrete filling 39 x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line 40 ms a.i.(50x50x6 mm), length: 2800 mm x(1 nos for las ) 41 x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch 42 x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed 43 x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer] 44 ms a.i.(50x50x6 mm), length: (2800 mm) x 2 no. 45 ms angle iron (35x35x5 mm), length : 460 mm x 2 nos 46 ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing 47 ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly 48 ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly 49 g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly 50 g.o ab switch unit (11kv,400,663ka) tripple pole o/d type 51 d.o fuse unit 52 surge arrester, 9 kv station class 53 discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.) 54 stay set complete 55 staywire (7/3.15mm)( 10 kg per stay set) 56 pipe earthing with gi,charcoal & salt 57 prov. lt distribution panel with mccb (10 a, 10 ka, 4p,1 no.) & sfu (32 a 4 no. rewireble) for 63 kva trf. as per specification 58 half clamp (m.s. flat 50x6) 59 full clamps (m.s. flat 50x6) 60 m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) 61 aluminium thimbles 62 copper thimble 63 danger plate 64 barbed wire (rec sp f 3/1981) 65 lt cable 3-1/2 core-185mm sq. 66 alluminium paint 67 prov.acsr, 6/1/3.35 mm 68 prov.63kva s/stn structure protection a/w chain link fencing, angle iron gate etc. for dtr fencing. 69 supply part of ht line with acsr 6/1/3.35 mm sq. on steel poles 0.150 km) 70 acsr 6/1/3.35 (55mm²) {includes 3 conductor lengths for 3f and additional 1% (sag, jumpering and wastage} 71 prov. steel tubular poles. 9mtrs 72 prov. steel tubular poles. 8mtrs 73 muff for steel tubular pole (2000mm long) with concrete filling 74 cross arm: [channel iron (100x50x6 mm), length 1270 mm (i/c tolerence of 100mm either side) x2 structure( run through structure (formation tringle) 75 angle iron (50x50x5 mm), length (2x750) mm x 1 structures (run through structure (formation tringle) 76 pole top bracket [msci:100x50x6mm-100mm] 77 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure (run through structure (formation tringle) 78 belt set - ms angle iron: 50x50x6, length [1800 mm x 2 no.]for dead end structures 79 x-bracing set - ms angle iron: 50x50x6, length [2125 mm x2 no.] for dead end structures 80 x-arm(horizental) - ms c. iron: 50x50x6, length [2340 mm x2 no.]for dead end structures 81 discs insulator sets on dead end structures (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.) x (3 no. conductors) x (2 no. sides)for dead end structures 82 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure for dead end structures 83 stay set complete in all respect ( single pole-1no. , /d. pole structures-4nos.) 84 stay wire (7/3.15 mm) (9.0 kg per stay set) 85 ht earthing set complete (rec constr. standared j-1) 86 single continous earth wire (gi, 8 swg) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and additional 1% (sag and wastage)} @ 0.102 kg/m 87 eye hook for earth wire 88 earth wire clamp 89 ms chanel iron 75x40x6mm, length: 2400mm for road crossing/g.o switch 90 half clamp (on d/p dead end str:4nos; on run through str. 2nos.) 91 full clamp (on d/p dead end str:4nos; on run through str. 2nos.) 92 danger plate (250x200x1.6 mm) 93 m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) 94 barbed wire (rec sp f 3/1981) 95 g.o ab switch unit (11kv,400,663ka) tripple pole o/d type 96 alluminium paint 97 erection part of ht line with acsr 6/1/3.35 mm sq. on steel poles (0.150 km) 98 acsr 6/1/3.35 (55mm²) {includes 3 conductor lengths for 3f and additional 1% (sag, jumpering and wastage} 99 prov. steel tubular poles. 9mtrs 100 prov. steel tubular poles. 8mtrs 101 muff for steel tubular pole (2000mm long) with concrete filling 102 cross arm: [channel iron (100x50x6 mm), length 1270 mm (i/c tolerence of 100mm either side) x2 structure( run through structure (formation tringle) 103 angle iron (50x50x5 mm), length (2x750) mm x 1 structures (run through structure (formation tringle) 104 pole top bracket [msci:100x50x6mm-100mm] 105 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure (run through structure (formation tringle) 106 belt set - ms angle iron: 50x50x6, length [1800 mm x 2 no.]for dead end structures 107 x-bracing set - ms angle iron: 50x50x6, length [2125 mm x2 no.] for dead end structures 108 x-arm(horizental) - ms c. iron: 50x50x6, length [2340 mm x2 no.]for dead end structures 109 discs insulator sets on dead end structures (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.) x (3 no. conductors) x (2 no. sides)for dead end structures 110 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no per pole structure for dead end structures 111 stay set complete in all respect ( single pole-1no. , /d. pole structures-4nos.) 112 stay wire (7/3.15 mm) (9.0 kg per stay set) 113 ht earthing set complete (rec constr. standared j-1) 114 single continous earth wire (gi, 8 swg) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and additional 1% (sag and wastage)} @ 0.102 kg/m 115 eye hook for earth wire 116 earth wire clamp 117 ms chanel iron 75x40x6mm, length: 2400mm for road crossing/g.o switch 118 half clamp (on d/p dead end str:4nos; on run through str. 2nos.) 119 full clamp (on d/p dead end str:4nos; on run through str. 2nos.) 120 danger plate (250x200x1.6 mm) 121 m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm ø or more (with flat and spring washer) 122 barbed wire (rec sp f 3/1981) 123 g.o ab switch unit (11kv,400,663ka) tripple pole o/d type 124 alluminium paint