tender for camouflage painting of otm accommodation at af station laitkor peakunder ge ( i ) ( af ) shillong. 1 material and labour for 15 mm thick renderingin cement mortar 1:4 in two layers ( 10 mm +5 mm ) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved lwpc on second layer ( 5 mm ) as per manufacturer instruction complete all as specified including taking down old cement plaster.note: lwpc shall be measured and paid separately 2 supply only lwpc 3 material and labour for preparation of new wall surfacesand applying two or more coats of 100% premium acrylic emulsion paint ( camouflage pattern ) having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additive @ 1.43 litre / 10 sqm over and including a coat of exterior primer applied @ 0.902 litre / 10 sqm with roller finish complete all as per manufacturer instruction note: camouflage pattern shall be approved by ge 4 material and labour for complete removal of old plastered or unplastered wall surfaces including brooming down or steel wire brushing , scrapping down smoke, soot , moulds , moss and efflorescent salts and trading oil and greasy spots etcand applying two coats of exterior emulsion anti fungal paint ( camouflage pattern ) over a coat of exterior primer with roller finish complete all as per manufacturer instruction note: camouflage pattern shall be approved by ge 5 material and labour for preparation of old plastered or unplastered wall surfaces including brooming down or steel wire brushing , scrapping down smoke, soot , moulds , moss and efflorescent salts and trading oil and greasy spots etcand applying one coat of exterior emulsion anti fungal paint ( camouflage pattern ) with roller finish complete all as per manufacturer instruction note: camouflage pattern shall be approved by ge 6 material and labour for old painted steel surfaces of any description not exceeding 10 cm width or girth and applying one finishing coat of synthetic enamel paint ( camouflage pattern ) complete all as specified.note: camouflage pattern shall be approved by ge 7 material and labour for old painted steel surfaces of any description over 10 cm width or girth and applying one finishing coat of synthetic enamel paint ( camouflage pattern ) complete all as specified.note: camouflage pattern shall be approved by ge