tender for mechanical works of hydromechanical equipments at harewali barrage, distt-bijnor under annual maintenance- 1 harewali barrage ( gate size : 18.00 x 5.52 mtr.= 03 nos. and 18.00 x 4.30 mtr. = 17 nos. 2 greasing, oiling of all components of lifting mechanism of gates ( excluding rollers, drum gear and pinion ) after proper cleaning with replacing grease cup / grease nipple as required including cost of all material, labour and t&p etc. required for proper completion of work. ( gate no. 1 to 20. ) 3 applying cardium compound on steel wire ropes, drums gears, pinions of gates after proper cleaing including cost of all materials, labour, t&p etc. required for proper completion of work. ( gate no. 1 to 8. ) 4 replacing, filling gear oil in redicon unit / reduction gear box after cleaning including cost of all material, labour nad t&p etc. required for proper completion of work. gate no. 6 to 20 5 overhauling of redicon unit by repairing after desmanting, cleaning an washing. reparing of main shaft sheet by welding and turning, replacing all damaged / broken parts and providing & fitting new parts as per required. assemling the redicon unit with proper oiling and greasing and fitting at site including cost of all material, labour t&p scaffolding carrieage etc. for proper completion of work. gate no. 1 to 5 6 replacing broken / missing, damaged bolts, unitin hydromechanical equipments and their components after proper checking of bolts, nut including cost of all material, labour, t&p etc. required for proper completion of work. gate no. 1 to 10 7 digging and taken out slush from the boxes and near by gates including removal of slush beyond30.00 meter from boxes including cost of all labour and t&p etc. for proper completion of work in gate no. 17 to 20. 8 harewali head regulator ( gate size : 8.80 x 2.65 mtr.= 05 nos. ) 9 greasing, oiling of components of lifting mechanism of gates excluding proper cleaning with replacing grease cap / grease nipple as required including cost of all material, labour and t&p etc.required for proper completion of work. ( gate no. 1 to 5. ) 10 applying cardium compound on steel wire ropes, teeth ofdrums gears, pinions of gates after proper cleaing including cost of all materials, labour, t&p and scaffolding with safety arrangments as required for proper completion of work. ( gate no. 1 to 5. )