tender for construction of computer lab / room at g.g.i.c. manpurhari, mainpuri-- 1 excavation in foundation in ordinary soil (loam, clay, or sand ) includinglift upto 1.50 m and lead upto 30m including filling watering and raming of excavated earth into the trenches or into the space between the building and the sides of foundation tranches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches. sino.251 2 antitermite treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart @ 100 nos holes per 9.00 sqm. including drilling 12 mm diameter holes and plugging also to match the floor properly : with chlorpyriphos / lindane e.c. 20% with 1 3 providing and laying cement . concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded brick ballast aggregate 40 mm nominal size ) includingsupply of all materials , labour and t & p etc. required for completion of work and curing complete , including cost of form work . in foundation and floors. s.i. no. 273(a) 4 providing and laying cement . concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded brick ballast aggregate 40 mm nominal size ) includingsupply of all materials , labour and t & p etc. required for completion of work and curing complete , including cost of form work . in foundation and floors. s.i. no.3/4.1 5 class m-150 brick work in 1:6 cement and coarse sandmortar in foundation and plinth including supply of all material labour and t&p etc. required for proper completion of work. s.i. no. 1/6.1 6 earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 3 km lead. the earth in form of cutting to be used as spoil banks within 50m distance as directed by the engineer-in charge. si no.253+253(d) 7 rcc work providing and laying in position specified grade of reinforced cement concrete in raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - all work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).si no.10/5.1 8 rcc work providing and laying in position specified grade of reinforced cement concrete,slab including the cost of centering, shuttering, finishing and excluding reinforcement - above plinth level upto fifth floor level in :1:1.5:3 (1 cement : 1.5 coarse.si no.11/5.1 9 mild steel or iron work in plain work such as reinforced concrete or rinforced brick work ( when not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the suplly of steel and its wastage bend. hooks and authorized over lapping shell be muasured upto floor to level. (for12 mm.) s.i no 504 10 class m-150 brick work in 1:6cement and coarse sand mortar in super structureincluding supply of material labour and t&p etc. required for proper complition of work. s.i.no.6.1+6.8a 11 class-150 (non modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work.si no.6.1+6.8a 12 15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.si no.7/13.5 13 12 mm. cement plaster in (1:4) cement and coarse sand in singlecoat onfairside of single or half brick wall for interior plastring upto floor to level including internal rounded angles chamfers , and/ or rounded angles not exceeding 80mm in girth and finished even and smooth. no extra mixing any additive. s.i. no. 2/13.4 14 mild steel and iron work of small size and section such as holding down woods, hold fasts tierods, grating, etc. (when not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing.si no.502 15 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter. 16 supply and fixing of flush doors, commercial quality conforming of i.s. 2202 part-1 (1983) including isi marked oxidized iron fitting with screws, bolt hinges,handles,siliding bolt, door stopper and tower bolt etc.32 mm thick. 17 supply and fixing fly and mosquitos proof stainless steel grade 304 wire mesh gauge with 0.50mm dia wire and 1.40mm wide aperture and including supply of c.p. teakwood batten 8cmx1cm (3x3/8)/flat iron 25mmx4mm and including supply of necessary screws all materials, labour, t&p etc. required for proper completion of work.ch.9,si no.18/455(a) 18 cementconcreteflooring1:2:4(cement ,c/sand and 12.5 mm stone grit) lai in one layer finished with floating coat of neat cement .(25 mm thick floor) 19 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor).ch.14,si no.5/665 20 providing and fixing glass strips of 4mm thick in joints of floor and skirting at the time of laying including labour, t&p etc. complete in all respect.(2.2mm thick)si no.25/631 21 finishing walls with pop approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, t&p etc. required for proper completion of work.ch.15,si no.30 22 distemperring with oil bond distemper of approved brand(three coats) and of required shade on undecorated wall surface to give an even shade over and including priming coat whiting after thoroughly brushing the surface free from dropping andother foreign matter including preparing the surface even and sand papered smooth.s.i. no. 13/649.+650 23 distemperring with oil bond distemper of approved brand(two coats) and of required shade on undecorated wall surface to give an even shade over and excluding priming coat after thoroughly brushing the surface free from dropping andother foreign matter including preparing the surface even and sand papered smooth.s.i. no. 14/650 24 painting two coat over priming coat on newsteel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 sq.m. in area with superior synthetic enamel such as luxol 3, hi gloss apcolite, superlac, dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.si no.641+19.29+642 25 painting two coats on new surface of wood with superior synthetic enamel such as luxol3, hi gloss apcolite,superlac,dulux spesified brusing to give and even shade and including the cleaning the surface of all dirt, dust and other foraign matter sand papering and scraping including cost of all materials, labour and t & p etc. required for proper complition of work. s.i. no.641+19.73+642 26 making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required. 27 s/f marble stone patiya etc. all complete. 28 wiring point for light with 1.5 sq.mm.frlshpvcinsulated multistrand single core copper conductor cablein pvc conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside,gp box, piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic laminated backalite sheet etc complete in all respect as directed including matching colour wash.si no. 138 c 29 wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting,complete with 1.5 sq. mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside,gp box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash.si no. 140 c 30 wiringpointforplugwith 1.5 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable inpvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcementbefore concreting, complete with 1.5 sq. mm.frlsh pvc insulatedmultistrandcopperconductorcable asearthwire drawninside the conduit. and piano typeswitch and socket etc., complete in all respect including matching colour wash. si no. 141 c 31 supply and fixing of power plug with 20 amp./250 voltflush type modular switch and 5 pin 20 a/250 volt flush type universal modular socketswitch on concealed m.s boxincluding supply of all material, labour t&p etc. required for proper completion of work. si no. 1139 a 32 s/f ofcomputer point with2 no. 5amp. 5 pin plug with switch and socket on concealed m.s. box including supply of all material, labour t&p etc, required for proper completion of work for computer. si no. 2 *(141c) 33 supply and fixing of electronic fan regulator( modular) 120-280 v. isi marked, on the existing switch board including making connections, required material, labour t&p etc. for proper completion of work to the satisfaction of engineer in charge of work. si no. 1203 c 34 supply and fixing ofled tube light with batten suitable for up to 1 x 22 watt led tube light fittingincluding tube on surface complete in all respect. si no. 1413a cat a 35 supply and wiring of submain with two number2.5sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) pvc conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with 1 nos. 1.5 sq. mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduitetc, complete in all respects including matching colour wash. si no. 1307 c 36 s & f surface/flush mounting 12 ways spn distribution board with additional metal doorwithout mcb complete in all respect, asdirect by engineer in charge. s.i. no. 1025 a cat b 37 s&f of 6 amp to 32 amp. spmcb (10 ka) c curve si no. 1002 cat a 38 s&f of 32amp. dp mcb (10 ka) c curve si no. 1009 cat a 39 supply and fixing hexagonal/roundg.p.fan box of approved make made up of 1.0 mm thickisi marked g.p.sheet spot welded four to eightholes of 25.4 mm for pipe entryof the box. holes should be semi-shuttered type with 0.5 mm g.p. sheet made upper & lower cover duly screwed fitted with 300 mmround zink coted m.sbar x 12 mm& brand name should be embossed. fixing with wiring conduit laid in the r.c.c. roof before concretingalongwith supply of all material, labour, t&p etc. required for proper completion of the work. si no. 1149 40 supply of bee 5 star rated-1200mm sweep ceiling fans with fan motor of a.c permanent insulation,capacitor rating confirming bee 5 star rating and is:374/79 and also comply with is:1709/1984 with latest amendment. the rated voltge 220/240 volts, 50hz, 1-ph ac the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. si no. 1501 (i) 41 erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick g.i.pipe19mm dia. duly painted, complete in all respect. si no. 1116 42 add for invertor wiring in wiring point for light/ fan/ plug with 1.5 mm cu wire si no. 189