various works at basement, first floor and fifth floor in vigilance bhawan, sector 68, sas nagar. -1 p / f of partially glazed wooden partition with 6mm thick glass fixed with beading duly polished and where as required finishied with 1.00 mm thick mica of approved shade complete in all respect. 2 providing & fixing stainless steel ball bearing hinges of size 100x89x3mm isi marked on door & window frames complete in all respect as per the directions of engineer-in-charge. 3 providing and fixing hydraulic door close isi mark with necessary screw etc.complete ( csr17.43-c ) i.s.i designation no. ii ( size of door 851mm to 1000mm ) 4 p / f s.s.door stopper 5 providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete ( best make of approved quality ) . 6 furniture except chairs p / f of wooden work station of size 60x3-0x2-6 made up of 19mm commercial board of make green-ecotech / marino finished with 1mm mica outer side and 0.8mm inner side of make marino of approved shades, including keyboard tray & drawers using hardware godrej / hetic / ebco. complete as per approved architectural drawings. 7 p / f of wooden work station of size 26x19x2-6 made up of 19mm commercial board of make green-ecotech / marino finished with 1mm mica outer side and 0.8mm inner side of make marino of approved shades, including keyboard tray & drawers using hardware godrej / hetic / ebco. complete as per approved architectural drawings. 8 p / f wooden cabinets made of 19mm thick commercial board finished with 1.00mm thick laminate of green / marino outside and 0.8mm laminate inner side of make green / marino of approved shade , using hardware such as hinges, catchers & aluminium powder coated channels of isi mark.complete as per architectural drawing. ( 7.0x26x19 ) 9 providing and fixing of 1mm thick make 3-m frosted film on clear glass for offices doors & windows i / c cost of all material and labour to required specifications and as directed by the engineer-in-charge. 10 providing & fixing wooden partition having internal frame work of sal wood section 50mm x 75mm, 6mm thick waterproof ply on both sides finished with 1mm thick mica complete as per architect drawing & as desired by engineer-in-charge. 11 supply & fixing of 12mm toughned clear glass shutter ( single leaf ) in glass partitions with pt 40 for over panel, pt 60 connector for upper panel, pt 20 std top patch, pt 10 bootom patch, us 10 std. corner lock + strike plate & epc & floor spring bts-75 for g / d , h type pull handle ctc - 350 mm tgdih ( 25mm dia x450 mm long dorma fittings.i / c cost of all material and labour to required specifications and as directed by the engineer-in-charge. 12 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections conforming to is: 733 and is : 1285 of jindal, hindalco, mahavir or equivalent make approved by engineer in charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required pvc plug / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p.brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. ( glazing and paneling to be paid for separately ) : ( a ) for fixed portion and chowkhats 13 ( b ) for shutters of doors, windows and ventilators including providing and fixing hinges / pivots and labour for fixing of fitting where ever required including the cost of pvc / neoprene gasket requiredin grooves of meeting style complete in all respect as per specifcation, drawing and to the entire satisfication of engineer-in-charge. 14 providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. pre-laminated particle board with decorative lamination on both side. 15 providing polyester powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. 16 cost of aluminum fittings complete for doors, windows such as tower bolts, handles, stoppers and screw etc. for these fittings ( excluding sliding bolt ) for shutter above 0.50 sqm 17 providing and fixing aluminum sliding door bolts isi marked anodized ( anodic coating not less than grade ac 10 as per is :1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete. 250mm x 16mm